Ny Caterpillar G3508B LE gassgenerator

We would like to offer the following unused CAT gas engine from the official CAT dealer:

Caterpillar G3508B LE gas industrial engine, 690 hp / 515 kW at 1400
min-1 in constant mode to drive the gas compressor.

Compression Ratio: 8.0:1
Rotational Speed: 1400 rpm (standard settings)
Intake Temperature: 54°C
Emissions: Low emissions of 1.0/0.5 g NOx/hp*hr
Control System: ADEM 3 Control System
Gas-to-Air Ratio Control: Yes
Operation: Works on a lean mixture
Displacement: 34.6 liters
Rated Engine Speed: 1000 rpm for compressor operation
Maximum Speed Limit: 1050 rpm
The air system
Standard Air Filter
Air intake adapter (not installed, mounted during engine installation)
Control system ADEM 3
Ignition Control
RPM Monitoring
Protection and Control
Knock Sensors
Variable Ignition Angle
Air-Fuel Ratio Control (requires external 24V DC power)
Cooling system
Jacket thermostats
Mechanical Engine Jacket Pump
Mixture Cooling Thermostats
Mechanical Mixture Cooler Pump
Mix Cooler (Two-Stage)
Motor jacket cooling inlet/outlet connection (flanged)
Exhaust system
"Dry" exhaust manifold
Flexible expansion joint (supplied separately, to be mounted during
engine installation)
Exhaust expander and flange (supplied separately, to be mounted
during engine installation)
Muffler with spark arrestor (supplied separately, to be mounted
during engine installation)
Power take-off
Case flywheel SAE No00
Маховик SAE No21
Direction of rotation – standard according to SAE
Damper with protection
Fuel system
Electronic fuel control valve (engine mounted)
Zero Gas Pressure Regulator (Engine Mounted)
Fuel system for gas pressure 48 - 276 kPa
Fuel system for gas (designed): 29.54 - 94.32 MJ/Nm3
Shut-off solenoid valve, 24V DC (not installed, mounted when the
motor is installed)
Gas filter (not installed, mounted when the engine is installed)
Ignition system
ADEM 3 (including detonation correction)
Toolbar
Advisor control panel (4" LCD display, displays all major engine
parameters including engine control and diagnostics) with engine
prelubrication control, explosion-proof (not installed, mounted when the
engine is installed)
Advisor Panel Harness (Not Installed, Mounted When Motor
Mounted, 50 ft)
PLE641 data transmission kit via Modbus (RS485), Ethernet (RJ45),
Radio channel (3G/GSM) – the system is installed and put into operation
by the supplier's specialists.
Protection system
Low oil pressure to the filter
Low pressure after the filter
High Engine Temperature
High oil temperature
Engine overspeed
Battery voltage
Intake manifold pressure
Detonation Detection
Engine inlet air temperature
Coolant pressure at engine inlet
Coolant pressure at engine outlet
Turbine Temperature: Left/Right Side, Inlet/Outlet
Cylinder temperatures
Engine hours
Oxygen level
Engine crankcase safety valves
Lubrication System
DUPLEX Oil Filter
Small Oil Pan
Crankcase gas removal
Oil Cooler
Oil sampling valve
Turbine lubrication system accumulator
Oil level indicator
Oil filler neck
Engine oil pan drainage
Oil in the engine pan
Mounting system
Industrial type "Rails" shooting gallery frame
Power supply and starting system
Air Starter TDI-150 PSI
Total
Color – Caterpillar Yellow
Sensor wiring and connections certified to CSA Class 1, Division 2,
Group 3 hazardous location, including engine control unit and Advisor
Control Panel
Standard Engine Test
Literature in Russian
Shipping Packaging
Torsional vibration analysis (up to 4 load points, for calculation,
parameters for coupling and compressor are provided by the customer
at least 10 working days before the engine is ready for shipment)