Ny Caterpillar CG170-20 2MW gassgenerator
Hörsching7279 km to "United States/Columbus"
Dersom du bestemmer deg for å kjøpe utstyr til en lav pris, sørg for at du kommuniserer med den ekte selgeren. Finn ut så mye informasjon som mulig om eieren av utstyret. En måte å jukse på er å presentere deg selv som en ekte bedrift Ved mistanke, informer oss om dette for ekstra kontroll, via tilbakemeldingsskjemaet.
Før du bestemmer deg for å gjøre et kjøp, se nøye på flere salgstilbud for å forstå den gjennomsnittlige prisen på det valgte utstyret. Dersom prisen på tilbudet du liker er mye lavere enn lignende tilbud, tenk over saken. En betydelig prisforskjell kan indikere skjulte defekter eller et forsøk fra selgeren til å utføre ulovlige handlinger.
Ikke kjøp produkter der prisen er for ulik fra gjennomsnittsprisen for lignende utstyr.
Ikke gi samtykke til tvilsomme pantsettelser og forhåndsbetalte varer. Ved tvil, ikke vær redd for å oppklare detaljer, spørre om flere bilder og dokumenter for utstyret, og sjekk autentisiteten til dokumentene, still spørsmål.
Den mest vanlige typen svindel. Urimelige selgere kan be om et visst beløp i forhåndsbetaling for å «reservere» din rett til å kjøpe utstyret. På denne måten kan svindlere samle inn et stort beløp og forsvinne, og aldri ta kontakt igjen.
- Overføring av forskuddsbetaling til kortet
- Ikke utfør en forhåndsbetaling uten å ha dokumenter som bekrefter overføringen av pengene, dersom selgeren under prosessen virker tvilsom.
- Overføring til en forvaltningskonto
- En slik forespørsel er alarmerende, og mest sannsynlig kommuniserer du med en svindler.
- Overføring til en firmakonto med et lignede navn
- Vær varsom, svindlere kan utgi dem selv for å være anerkjente selskaper, ved å gjøre små endringer på navnet. Ikke overfør penger dersom selskapets navn er tvilsomt.
- Utskiftning av egne detaljer på fakturaen til et ekte selskap
- Bør du utfører overføringen, sjekk at de spesifiserte detaljene er riktige, og hvorvidt de faktisk hører til det spesifiserte selskapet.
Selgers kontakter
+358 50 53...
Vis
+358 50 5345498
+358 9 231...
Vis
+358 9 23165797
Østerrike 
50 Hz
Østerrike, Hörsching
50 Hz
Østerrike, Hörsching
50 Hz
Østerrike, Hörsching
Østerrike, Hörsching
Østerrike, Hörsching
Portugal, Seixal
Belgia, Hamont
Belgia, Hamont
50 Hz
Italia, Rome
Østerrike, Hörsching
60 Hz
Belgia, Waregem
50 Hz
Tyskland, Bergisch-Gladbach
50 Hz
Tyskland, Bergisch-Gladbach
50 Hz
Frankrike, Villeparisis
Nederland, Moerdijk
Belgia, Hamont
50 Hz
Tyskland, Bergisch-Gladbach
Belgia, Hamont
Gassgeneratorer reservedeler
Available for sale. New 2000kW New unused Caterpillar CG170-20 Natural Gas Industrial Generator Sets. Rated at 2000 kw, 50 Hz, 10500 V / 400V ,500 RPM. Year 2018, 0 hours since new. CAT warranty.
Ready to dispatch from the stock. Contact us details.
Газопоршневая электростанция CAT CG170-20 натуральный газ. Новые без наработки. Наличие на складе .
----
Genset Base engine-
Base engine CG170-20 50Hz Base alternator
Standard alternator n = 1,500 / min Base genset
Base genset Natural gas 50Hz, MV, Marelli Exhaust gas outlet
Exhaust manifold with Exhaust waste gate, manifold 90° vertical Preservation
Standard conservation (24 months)
Exhaust turbo charger
Exhaust turbo charger Base frame
Base frame with oil tank, 230/400 V pre-lubrication Combustion air filter and preheating
without preheating CG 170 -20
Suction and Cooling system (biogas applications and tropical conditions) Paint job
Primer, top coat and spare paint: Cat-yellow EATY008 Name plate
name plate in English Crankcase ventilation
Crankcase ventilation / UPF 105 Exhaust pressure monitor
Exhaust back pressure sensor
Spare parts for commisioning
Spare parts for comissioning CAT TEM system Base system TEM
Specification -
Remark
Quantity Description
Base system (CST170F20-F) Frequently chosen options TEM
Heat utilization with heating circuit (HK)
Dump cooling and exhaust bypass control (NK/BY)
Radiator controler (TKS1)
3 CH4 compensation for mutable CH4 concentration, extention package for CH4 ompensation
Modbus RTU (MRTU) 3 Demand of external starting preparations (AES) Visualisation TEM
Operating terminal (BRT-C)
TEM control cabinet, packaging, cables
Console (KBW)
TEM connecting cable set CG 170K/170 15m (K20ARM15) Plant components Batteries
Starter battery in quadruple storage box Zero-pressure gas control train
Gas train DN 150/150/150 (RMG) 3 Non-standard zero-pressure gas train -3 Non-standard zero-pressure gas train Intercooling circuit sensors
Counter flange DN 65 3 Safety valve 3 bar 3 Differential pressure switch 3 Temperature sensor PT 100 3 Water low level switch 3 Ventilation valve 3 Three-way valve DN 65/ PN16, 230 V Engine cooling circuit sensors
Safety valve 3 bar
Differential pressure switch 3 Water low level switch 3 Ventilation valve 3 Electric preheating 9 kW Heating circuit sensors
Remark
Quantity Description
Differential pressure switch 9 Temperature sensor PT 100 Back-up cooling circuit sensors
Counter flange DN 100
Temperature sensor PT 100 3 Water low level switch 3 Ventilation valve 3 Three-way valve DN 100/ PN16, 230 V Cooling water pumps intercooling circuit
Counter flange DN 50 Coolant pump DN 50 Etaline vis kontakter/133 Cooling water pumps engine cooling circuit
Counter flange DN 65 Counter flange set DN 65 Throttle valve DN 65
Coolant pump DN 65 Etaline 065-065-160/162 Expansion vessels intercooling circuit
Expansion vessel 250l
Lock-off valve for expansion tank
Expansion tank manometer Manometer cut-off valve Expansion vessels engine cooling circuit
Expansion vessel 400l Lock-off valve for expansion tank 3 Expansion tank manometer Manometer cut-off valve Services Final inspection
engine test without customer participation Packing
Seaworthy packing for genset: wooden pallet and foil cover 1 packing plant components Standard documentation
Standard documentation (2 copies) incl. preparation
Available for sale. New 2000kW New unused Caterpillar CG170-20 Natural Gas Industrial Generator Sets. Rated at 2000 kw, 50 Hz, 10500 V / 400V ,500 RPM. Year 2018, 0 hours since new. CAT warranty.
Ready to dispatch from the stock. Contact us details.
Газопоршневая электростанция CAT CG170-20 натуральный газ. Новые без наработки. Наличие на складе .
----
Genset Base engine-
Base engine CG170-20 50Hz Base alternator
Standard alternator n = 1,500 / min Base genset
Base genset Natural gas 50Hz, MV, Marelli Exhaust gas outlet
Exhaust manifold with Exhaust waste gate, manifold 90° vertical Preservation
Standard conservation (24 months)
Exhaust turbo charger
Exhaust turbo charger Base frame
Base frame with oil tank, 230/400 V pre-lubrication Combustion air filter and preheating
without preheating CG 170 -20
Suction and Cooling system (biogas applications and tropical conditions) Paint job
Primer, top coat and spare paint: Cat-yellow EATY008 Name plate
name plate in English Crankcase ventilation
Crankcase ventilation / UPF 105 Exhaust pressure monitor
Exhaust back pressure sensor
Spare parts for commisioning
Spare parts for comissioning CAT TEM system Base system TEM
Specification -
Remark
Quantity Description
Base system (CST170F20-F) Frequently chosen options TEM
Heat utilization with heating circuit (HK)
Dump cooling and exhaust bypass control (NK/BY)
Radiator controler (TKS1)
3 CH4 compensation for mutable CH4 concentration, extention package for CH4 ompensation
Modbus RTU (MRTU) 3 Demand of external starting preparations (AES) Visualisation TEM
Operating terminal (BRT-C)
TEM control cabinet, packaging, cables
Console (KBW)
TEM connecting cable set CG 170K/170 15m (K20ARM15) Plant components Batteries
Starter battery in quadruple storage box Zero-pressure gas control train
Gas train DN 150/150/150 (RMG) 3 Non-standard zero-pressure gas train -3 Non-standard zero-pressure gas train Intercooling circuit sensors
Counter flange DN 65 3 Safety valve 3 bar 3 Differential pressure switch 3 Temperature sensor PT 100 3 Water low level switch 3 Ventilation valve 3 Three-way valve DN 65/ PN16, 230 V Engine cooling circuit sensors
Safety valve 3 bar
Differential pressure switch 3 Water low level switch 3 Ventilation valve 3 Electric preheating 9 kW Heating circuit sensors
Remark
Quantity Description
Differential pressure switch 9 Temperature sensor PT 100 Back-up cooling circuit sensors
Counter flange DN 100
Temperature sensor PT 100 3 Water low level switch 3 Ventilation valve 3 Three-way valve DN 100/ PN16, 230 V Cooling water pumps intercooling circuit
Counter flange DN 50 Coolant pump DN 50 Etaline vis kontakter/133 Cooling water pumps engine cooling circuit
Counter flange DN 65 Counter flange set DN 65 Throttle valve DN 65
Coolant pump DN 65 Etaline 065-065-160/162 Expansion vessels intercooling circuit
Expansion vessel 250l
Lock-off valve for expansion tank
Expansion tank manometer Manometer cut-off valve Expansion vessels engine cooling circuit
Expansion vessel 400l Lock-off valve for expansion tank 3 Expansion tank manometer Manometer cut-off valve Services Final inspection
engine test without customer participation Packing
Seaworthy packing for genset: wooden pallet and foil cover 1 packing plant components Standard documentation
Standard documentation (2 copies) incl. preparation
Available for sale. New 2000kW New unused Caterpillar CG170-20 Natural Gas Industrial Generator Sets. Rated at 2000 kw, 50 Hz, 10500 V / 400V ,500 RPM. Year 2018, 0 hours since new. CAT warranty.
Ready to dispatch from the stock. Contact us details.
Газопоршневая электростанция CAT CG170-20 натуральный газ. Новые без наработки. Наличие на складе .
----
Genset Base engine-
Base engine CG170-20 50Hz Base alternator
Standard alternator n = 1,500 / min Base genset
Base genset Natural gas 50Hz, MV, Marelli Exhaust gas outlet
Exhaust manifold with Exhaust waste gate, manifold 90° vertical Preservation
Standard conservation (24 months)
Exhaust turbo charger
Exhaust turbo charger Base frame
Base frame with oil tank, 230/400 V pre-lubrication Combustion air filter and preheating
without preheating CG 170 -20
Suction and Cooling system (biogas applications and tropical conditions) Paint job
Primer, top coat and spare paint: Cat-yellow EATY008 Name plate
name plate in English Crankcase ventilation
Crankcase ventilation / UPF 105 Exhaust pressure monitor
Exhaust back pressure sensor
Spare parts for commisioning
Spare parts for comissioning CAT TEM system Base system TEM
Specification -
Remark
Quantity Description
Base system (CST170F20-F) Frequently chosen options TEM
Heat utilization with heating circuit (HK)
Dump cooling and exhaust bypass control (NK/BY)
Radiator controler (TKS1)
3 CH4 compensation for mutable CH4 concentration, extention package for CH4 ompensation
Modbus RTU (MRTU) 3 Demand of external starting preparations (AES) Visualisation TEM
Operating terminal (BRT-C)
TEM control cabinet, packaging, cables
Console (KBW)
TEM connecting cable set CG 170K/170 15m (K20ARM15) Plant components Batteries
Starter battery in quadruple storage box Zero-pressure gas control train
Gas train DN 150/150/150 (RMG) 3 Non-standard zero-pressure gas train -3 Non-standard zero-pressure gas train Intercooling circuit sensors
Counter flange DN 65 3 Safety valve 3 bar 3 Differential pressure switch 3 Temperature sensor PT 100 3 Water low level switch 3 Ventilation valve 3 Three-way valve DN 65/ PN16, 230 V Engine cooling circuit sensors
Safety valve 3 bar
Differential pressure switch 3 Water low level switch 3 Ventilation valve 3 Electric preheating 9 kW Heating circuit sensors
Remark
Quantity Description
Differential pressure switch 9 Temperature sensor PT 100 Back-up cooling circuit sensors
Counter flange DN 100
Temperature sensor PT 100 3 Water low level switch 3 Ventilation valve 3 Three-way valve DN 100/ PN16, 230 V Cooling water pumps intercooling circuit
Counter flange DN 50 Coolant pump DN 50 Etaline vis kontakter/133 Cooling water pumps engine cooling circuit
Counter flange DN 65 Counter flange set DN 65 Throttle valve DN 65
Coolant pump DN 65 Etaline 065-065-160/162 Expansion vessels intercooling circuit
Expansion vessel 250l
Lock-off valve for expansion tank
Expansion tank manometer Manometer cut-off valve Expansion vessels engine cooling circuit
Expansion vessel 400l Lock-off valve for expansion tank 3 Expansion tank manometer Manometer cut-off valve Services Final inspection
engine test without customer participation Packing
Seaworthy packing for genset: wooden pallet and foil cover 1 packing plant components Standard documentation
Standard documentation (2 copies) incl. preparation
Available for sale. New 2000kW New unused Caterpillar CG170-20 Natural Gas Industrial Generator Sets. Rated at 2000 kw, 50 Hz, 10500 V / 400V ,500 RPM. Year 2018, 0 hours since new. CAT warranty.
Ready to dispatch from the stock. Contact us details.
Газопоршневая электростанция CAT CG170-20 натуральный газ. Новые без наработки. Наличие на складе .
----
Genset Base engine-
Base engine CG170-20 50Hz Base alternator
Standard alternator n = 1,500 / min Base genset
Base genset Natural gas 50Hz, MV, Marelli Exhaust gas outlet
Exhaust manifold with Exhaust waste gate, manifold 90° vertical Preservation
Standard conservation (24 months)
Exhaust turbo charger
Exhaust turbo charger Base frame
Base frame with oil tank, 230/400 V pre-lubrication Combustion air filter and preheating
without preheating CG 170 -20
Suction and Cooling system (biogas applications and tropical conditions) Paint job
Primer, top coat and spare paint: Cat-yellow EATY008 Name plate
name plate in English Crankcase ventilation
Crankcase ventilation / UPF 105 Exhaust pressure monitor
Exhaust back pressure sensor
Spare parts for commisioning
Spare parts for comissioning CAT TEM system Base system TEM
Specification -
Remark
Quantity Description
Base system (CST170F20-F) Frequently chosen options TEM
Heat utilization with heating circuit (HK)
Dump cooling and exhaust bypass control (NK/BY)
Radiator controler (TKS1)
3 CH4 compensation for mutable CH4 concentration, extention package for CH4 ompensation
Modbus RTU (MRTU) 3 Demand of external starting preparations (AES) Visualisation TEM
Operating terminal (BRT-C)
TEM control cabinet, packaging, cables
Console (KBW)
TEM connecting cable set CG 170K/170 15m (K20ARM15) Plant components Batteries
Starter battery in quadruple storage box Zero-pressure gas control train
Gas train DN 150/150/150 (RMG) 3 Non-standard zero-pressure gas train -3 Non-standard zero-pressure gas train Intercooling circuit sensors
Counter flange DN 65 3 Safety valve 3 bar 3 Differential pressure switch 3 Temperature sensor PT 100 3 Water low level switch 3 Ventilation valve 3 Three-way valve DN 65/ PN16, 230 V Engine cooling circuit sensors
Safety valve 3 bar
Differential pressure switch 3 Water low level switch 3 Ventilation valve 3 Electric preheating 9 kW Heating circuit sensors
Remark
Quantity Description
Differential pressure switch 9 Temperature sensor PT 100 Back-up cooling circuit sensors
Counter flange DN 100
Temperature sensor PT 100 3 Water low level switch 3 Ventilation valve 3 Three-way valve DN 100/ PN16, 230 V Cooling water pumps intercooling circuit
Counter flange DN 50 Coolant pump DN 50 Etaline vis kontakter/133 Cooling water pumps engine cooling circuit
Counter flange DN 65 Counter flange set DN 65 Throttle valve DN 65
Coolant pump DN 65 Etaline 065-065-160/162 Expansion vessels intercooling circuit
Expansion vessel 250l
Lock-off valve for expansion tank
Expansion tank manometer Manometer cut-off valve Expansion vessels engine cooling circuit
Expansion vessel 400l Lock-off valve for expansion tank 3 Expansion tank manometer Manometer cut-off valve Services Final inspection
engine test without customer participation Packing
Seaworthy packing for genset: wooden pallet and foil cover 1 packing plant components Standard documentation
Standard documentation (2 copies) incl. preparation
Available for sale. New 2000kW New unused Caterpillar CG170-20 Natural Gas Industrial Generator Sets. Rated at 2000 kw, 50 Hz, 10500 V / 400V ,500 RPM. Year 2018, 0 hours since new. CAT warranty.
Ready to dispatch from the stock. Contact us details.
Газопоршневая электростанция CAT CG170-20 натуральный газ. Новые без наработки. Наличие на складе .
----
Genset Base engine-
Base engine CG170-20 50Hz Base alternator
Standard alternator n = 1,500 / min Base genset
Base genset Natural gas 50Hz, MV, Marelli Exhaust gas outlet
Exhaust manifold with Exhaust waste gate, manifold 90° vertical Preservation
Standard conservation (24 months)
Exhaust turbo charger
Exhaust turbo charger Base frame
Base frame with oil tank, 230/400 V pre-lubrication Combustion air filter and preheating
without preheating CG 170 -20
Suction and Cooling system (biogas applications and tropical conditions) Paint job
Primer, top coat and spare paint: Cat-yellow EATY008 Name plate
name plate in English Crankcase ventilation
Crankcase ventilation / UPF 105 Exhaust pressure monitor
Exhaust back pressure sensor
Spare parts for commisioning
Spare parts for comissioning CAT TEM system Base system TEM
Specification -
Remark
Quantity Description
Base system (CST170F20-F) Frequently chosen options TEM
Heat utilization with heating circuit (HK)
Dump cooling and exhaust bypass control (NK/BY)
Radiator controler (TKS1)
3 CH4 compensation for mutable CH4 concentration, extention package for CH4 ompensation
Modbus RTU (MRTU) 3 Demand of external starting preparations (AES) Visualisation TEM
Operating terminal (BRT-C)
TEM control cabinet, packaging, cables
Console (KBW)
TEM connecting cable set CG 170K/170 15m (K20ARM15) Plant components Batteries
Starter battery in quadruple storage box Zero-pressure gas control train
Gas train DN 150/150/150 (RMG) 3 Non-standard zero-pressure gas train -3 Non-standard zero-pressure gas train Intercooling circuit sensors
Counter flange DN 65 3 Safety valve 3 bar 3 Differential pressure switch 3 Temperature sensor PT 100 3 Water low level switch 3 Ventilation valve 3 Three-way valve DN 65/ PN16, 230 V Engine cooling circuit sensors
Safety valve 3 bar
Differential pressure switch 3 Water low level switch 3 Ventilation valve 3 Electric preheating 9 kW Heating circuit sensors
Remark
Quantity Description
Differential pressure switch 9 Temperature sensor PT 100 Back-up cooling circuit sensors
Counter flange DN 100
Temperature sensor PT 100 3 Water low level switch 3 Ventilation valve 3 Three-way valve DN 100/ PN16, 230 V Cooling water pumps intercooling circuit
Counter flange DN 50 Coolant pump DN 50 Etaline vis kontakter/133 Cooling water pumps engine cooling circuit
Counter flange DN 65 Counter flange set DN 65 Throttle valve DN 65
Coolant pump DN 65 Etaline 065-065-160/162 Expansion vessels intercooling circuit
Expansion vessel 250l
Lock-off valve for expansion tank
Expansion tank manometer Manometer cut-off valve Expansion vessels engine cooling circuit
Expansion vessel 400l Lock-off valve for expansion tank 3 Expansion tank manometer Manometer cut-off valve Services Final inspection
engine test without customer participation Packing
Seaworthy packing for genset: wooden pallet and foil cover 1 packing plant components Standard documentation
Standard documentation (2 copies) incl. preparation
Available for sale. New 2000kW New unused Caterpillar CG170-20 Natural Gas Industrial Generator Sets. Rated at 2000 kw, 50 Hz, 10500 V / 400V ,500 RPM. Year 2018, 0 hours since new. CAT warranty.
Ready to dispatch from the stock. Contact us details.
Газопоршневая электростанция CAT CG170-20 натуральный газ. Новые без наработки. Наличие на складе .
----
Genset Base engine-
Base engine CG170-20 50Hz Base alternator
Standard alternator n = 1,500 / min Base genset
Base genset Natural gas 50Hz, MV, Marelli Exhaust gas outlet
Exhaust manifold with Exhaust waste gate, manifold 90° vertical Preservation
Standard conservation (24 months)
Exhaust turbo charger
Exhaust turbo charger Base frame
Base frame with oil tank, 230/400 V pre-lubrication Combustion air filter and preheating
without preheating CG 170 -20
Suction and Cooling system (biogas applications and tropical conditions) Paint job
Primer, top coat and spare paint: Cat-yellow EATY008 Name plate
name plate in English Crankcase ventilation
Crankcase ventilation / UPF 105 Exhaust pressure monitor
Exhaust back pressure sensor
Spare parts for commisioning
Spare parts for comissioning CAT TEM system Base system TEM
Specification -
Remark
Quantity Description
Base system (CST170F20-F) Frequently chosen options TEM
Heat utilization with heating circuit (HK)
Dump cooling and exhaust bypass control (NK/BY)
Radiator controler (TKS1)
3 CH4 compensation for mutable CH4 concentration, extention package for CH4 ompensation
Modbus RTU (MRTU) 3 Demand of external starting preparations (AES) Visualisation TEM
Operating terminal (BRT-C)
TEM control cabinet, packaging, cables
Console (KBW)
TEM connecting cable set CG 170K/170 15m (K20ARM15) Plant components Batteries
Starter battery in quadruple storage box Zero-pressure gas control train
Gas train DN 150/150/150 (RMG) 3 Non-standard zero-pressure gas train -3 Non-standard zero-pressure gas train Intercooling circuit sensors
Counter flange DN 65 3 Safety valve 3 bar 3 Differential pressure switch 3 Temperature sensor PT 100 3 Water low level switch 3 Ventilation valve 3 Three-way valve DN 65/ PN16, 230 V Engine cooling circuit sensors
Safety valve 3 bar
Differential pressure switch 3 Water low level switch 3 Ventilation valve 3 Electric preheating 9 kW Heating circuit sensors
Remark
Quantity Description
Differential pressure switch 9 Temperature sensor PT 100 Back-up cooling circuit sensors
Counter flange DN 100
Temperature sensor PT 100 3 Water low level switch 3 Ventilation valve 3 Three-way valve DN 100/ PN16, 230 V Cooling water pumps intercooling circuit
Counter flange DN 50 Coolant pump DN 50 Etaline vis kontakter/133 Cooling water pumps engine cooling circuit
Counter flange DN 65 Counter flange set DN 65 Throttle valve DN 65
Coolant pump DN 65 Etaline 065-065-160/162 Expansion vessels intercooling circuit
Expansion vessel 250l
Lock-off valve for expansion tank
Expansion tank manometer Manometer cut-off valve Expansion vessels engine cooling circuit
Expansion vessel 400l Lock-off valve for expansion tank 3 Expansion tank manometer Manometer cut-off valve Services Final inspection
engine test without customer participation Packing
Seaworthy packing for genset: wooden pallet and foil cover 1 packing plant components Standard documentation
Standard documentation (2 copies) incl. preparation
Available for sale. New 2000kW New unused Caterpillar CG170-20 Natural Gas Industrial Generator Sets. Rated at 2000 kw, 50 Hz, 10500 V / 400V ,500 RPM. Year 2018, 0 hours since new. CAT warranty.
Ready to dispatch from the stock. Contact us details.
Газопоршневая электростанция CAT CG170-20 натуральный газ. Новые без наработки. Наличие на складе .
----
Genset Base engine-
Base engine CG170-20 50Hz Base alternator
Standard alternator n = 1,500 / min Base genset
Base genset Natural gas 50Hz, MV, Marelli Exhaust gas outlet
Exhaust manifold with Exhaust waste gate, manifold 90° vertical Preservation
Standard conservation (24 months)
Exhaust turbo charger
Exhaust turbo charger Base frame
Base frame with oil tank, 230/400 V pre-lubrication Combustion air filter and preheating
without preheating CG 170 -20
Suction and Cooling system (biogas applications and tropical conditions) Paint job
Primer, top coat and spare paint: Cat-yellow EATY008 Name plate
name plate in English Crankcase ventilation
Crankcase ventilation / UPF 105 Exhaust pressure monitor
Exhaust back pressure sensor
Spare parts for commisioning
Spare parts for comissioning CAT TEM system Base system TEM
Specification -
Remark
Quantity Description
Base system (CST170F20-F) Frequently chosen options TEM
Heat utilization with heating circuit (HK)
Dump cooling and exhaust bypass control (NK/BY)
Radiator controler (TKS1)
3 CH4 compensation for mutable CH4 concentration, extention package for CH4 ompensation
Modbus RTU (MRTU) 3 Demand of external starting preparations (AES) Visualisation TEM
Operating terminal (BRT-C)
TEM control cabinet, packaging, cables
Console (KBW)
TEM connecting cable set CG 170K/170 15m (K20ARM15) Plant components Batteries
Starter battery in quadruple storage box Zero-pressure gas control train
Gas train DN 150/150/150 (RMG) 3 Non-standard zero-pressure gas train -3 Non-standard zero-pressure gas train Intercooling circuit sensors
Counter flange DN 65 3 Safety valve 3 bar 3 Differential pressure switch 3 Temperature sensor PT 100 3 Water low level switch 3 Ventilation valve 3 Three-way valve DN 65/ PN16, 230 V Engine cooling circuit sensors
Safety valve 3 bar
Differential pressure switch 3 Water low level switch 3 Ventilation valve 3 Electric preheating 9 kW Heating circuit sensors
Remark
Quantity Description
Differential pressure switch 9 Temperature sensor PT 100 Back-up cooling circuit sensors
Counter flange DN 100
Temperature sensor PT 100 3 Water low level switch 3 Ventilation valve 3 Three-way valve DN 100/ PN16, 230 V Cooling water pumps intercooling circuit
Counter flange DN 50 Coolant pump DN 50 Etaline vis kontakter/133 Cooling water pumps engine cooling circuit
Counter flange DN 65 Counter flange set DN 65 Throttle valve DN 65
Coolant pump DN 65 Etaline 065-065-160/162 Expansion vessels intercooling circuit
Expansion vessel 250l
Lock-off valve for expansion tank
Expansion tank manometer Manometer cut-off valve Expansion vessels engine cooling circuit
Expansion vessel 400l Lock-off valve for expansion tank 3 Expansion tank manometer Manometer cut-off valve Services Final inspection
engine test without customer participation Packing
Seaworthy packing for genset: wooden pallet and foil cover 1 packing plant components Standard documentation
Standard documentation (2 copies) incl. preparation
Available for sale. New 2000kW New unused Caterpillar CG170-20 Natural Gas Industrial Generator Sets. Rated at 2000 kw, 50 Hz, 10500 V / 400V ,500 RPM. Year 2018, 0 hours since new. CAT warranty.
Ready to dispatch from the stock. Contact us details.
Газопоршневая электростанция CAT CG170-20 натуральный газ. Новые без наработки. Наличие на складе .
----
Genset Base engine-
Base engine CG170-20 50Hz Base alternator
Standard alternator n = 1,500 / min Base genset
Base genset Natural gas 50Hz, MV, Marelli Exhaust gas outlet
Exhaust manifold with Exhaust waste gate, manifold 90° vertical Preservation
Standard conservation (24 months)
Exhaust turbo charger
Exhaust turbo charger Base frame
Base frame with oil tank, 230/400 V pre-lubrication Combustion air filter and preheating
without preheating CG 170 -20
Suction and Cooling system (biogas applications and tropical conditions) Paint job
Primer, top coat and spare paint: Cat-yellow EATY008 Name plate
name plate in English Crankcase ventilation
Crankcase ventilation / UPF 105 Exhaust pressure monitor
Exhaust back pressure sensor
Spare parts for commisioning
Spare parts for comissioning CAT TEM system Base system TEM
Specification -
Remark
Quantity Description
Base system (CST170F20-F) Frequently chosen options TEM
Heat utilization with heating circuit (HK)
Dump cooling and exhaust bypass control (NK/BY)
Radiator controler (TKS1)
3 CH4 compensation for mutable CH4 concentration, extention package for CH4 ompensation
Modbus RTU (MRTU) 3 Demand of external starting preparations (AES) Visualisation TEM
Operating terminal (BRT-C)
TEM control cabinet, packaging, cables
Console (KBW)
TEM connecting cable set CG 170K/170 15m (K20ARM15) Plant components Batteries
Starter battery in quadruple storage box Zero-pressure gas control train
Gas train DN 150/150/150 (RMG) 3 Non-standard zero-pressure gas train -3 Non-standard zero-pressure gas train Intercooling circuit sensors
Counter flange DN 65 3 Safety valve 3 bar 3 Differential pressure switch 3 Temperature sensor PT 100 3 Water low level switch 3 Ventilation valve 3 Three-way valve DN 65/ PN16, 230 V Engine cooling circuit sensors
Safety valve 3 bar
Differential pressure switch 3 Water low level switch 3 Ventilation valve 3 Electric preheating 9 kW Heating circuit sensors
Remark
Quantity Description
Differential pressure switch 9 Temperature sensor PT 100 Back-up cooling circuit sensors
Counter flange DN 100
Temperature sensor PT 100 3 Water low level switch 3 Ventilation valve 3 Three-way valve DN 100/ PN16, 230 V Cooling water pumps intercooling circuit
Counter flange DN 50 Coolant pump DN 50 Etaline vis kontakter/133 Cooling water pumps engine cooling circuit
Counter flange DN 65 Counter flange set DN 65 Throttle valve DN 65
Coolant pump DN 65 Etaline 065-065-160/162 Expansion vessels intercooling circuit
Expansion vessel 250l
Lock-off valve for expansion tank
Expansion tank manometer Manometer cut-off valve Expansion vessels engine cooling circuit
Expansion vessel 400l Lock-off valve for expansion tank 3 Expansion tank manometer Manometer cut-off valve Services Final inspection
engine test without customer participation Packing
Seaworthy packing for genset: wooden pallet and foil cover 1 packing plant components Standard documentation
Standard documentation (2 copies) incl. preparation
Available for sale. New 2000kW New unused Caterpillar CG170-20 Natural Gas Industrial Generator Sets. Rated at 2000 kw, 50 Hz, 10500 V / 400V ,500 RPM. Year 2018, 0 hours since new. CAT warranty.
Ready to dispatch from the stock. Contact us details.
Газопоршневая электростанция CAT CG170-20 натуральный газ. Новые без наработки. Наличие на складе .
----
Genset Base engine-
Base engine CG170-20 50Hz Base alternator
Standard alternator n = 1,500 / min Base genset
Base genset Natural gas 50Hz, MV, Marelli Exhaust gas outlet
Exhaust manifold with Exhaust waste gate, manifold 90° vertical Preservation
Standard conservation (24 months)
Exhaust turbo charger
Exhaust turbo charger Base frame
Base frame with oil tank, 230/400 V pre-lubrication Combustion air filter and preheating
without preheating CG 170 -20
Suction and Cooling system (biogas applications and tropical conditions) Paint job
Primer, top coat and spare paint: Cat-yellow EATY008 Name plate
name plate in English Crankcase ventilation
Crankcase ventilation / UPF 105 Exhaust pressure monitor
Exhaust back pressure sensor
Spare parts for commisioning
Spare parts for comissioning CAT TEM system Base system TEM
Specification -
Remark
Quantity Description
Base system (CST170F20-F) Frequently chosen options TEM
Heat utilization with heating circuit (HK)
Dump cooling and exhaust bypass control (NK/BY)
Radiator controler (TKS1)
3 CH4 compensation for mutable CH4 concentration, extention package for CH4 ompensation
Modbus RTU (MRTU) 3 Demand of external starting preparations (AES) Visualisation TEM
Operating terminal (BRT-C)
TEM control cabinet, packaging, cables
Console (KBW)
TEM connecting cable set CG 170K/170 15m (K20ARM15) Plant components Batteries
Starter battery in quadruple storage box Zero-pressure gas control train
Gas train DN 150/150/150 (RMG) 3 Non-standard zero-pressure gas train -3 Non-standard zero-pressure gas train Intercooling circuit sensors
Counter flange DN 65 3 Safety valve 3 bar 3 Differential pressure switch 3 Temperature sensor PT 100 3 Water low level switch 3 Ventilation valve 3 Three-way valve DN 65/ PN16, 230 V Engine cooling circuit sensors
Safety valve 3 bar
Differential pressure switch 3 Water low level switch 3 Ventilation valve 3 Electric preheating 9 kW Heating circuit sensors
Remark
Quantity Description
Differential pressure switch 9 Temperature sensor PT 100 Back-up cooling circuit sensors
Counter flange DN 100
Temperature sensor PT 100 3 Water low level switch 3 Ventilation valve 3 Three-way valve DN 100/ PN16, 230 V Cooling water pumps intercooling circuit
Counter flange DN 50 Coolant pump DN 50 Etaline vis kontakter/133 Cooling water pumps engine cooling circuit
Counter flange DN 65 Counter flange set DN 65 Throttle valve DN 65
Coolant pump DN 65 Etaline 065-065-160/162 Expansion vessels intercooling circuit
Expansion vessel 250l
Lock-off valve for expansion tank
Expansion tank manometer Manometer cut-off valve Expansion vessels engine cooling circuit
Expansion vessel 400l Lock-off valve for expansion tank 3 Expansion tank manometer Manometer cut-off valve Services Final inspection
engine test without customer participation Packing
Seaworthy packing for genset: wooden pallet and foil cover 1 packing plant components Standard documentation
Standard documentation (2 copies) incl. preparation
Available for sale. New 2000kW New unused Caterpillar CG170-20 Natural Gas Industrial Generator Sets. Rated at 2000 kw, 50 Hz, 10500 V / 400V ,500 RPM. Year 2018, 0 hours since new. CAT warranty.
Ready to dispatch from the stock. Contact us details.
Газопоршневая электростанция CAT CG170-20 натуральный газ. Новые без наработки. Наличие на складе .
----
Genset Base engine-
Base engine CG170-20 50Hz Base alternator
Standard alternator n = 1,500 / min Base genset
Base genset Natural gas 50Hz, MV, Marelli Exhaust gas outlet
Exhaust manifold with Exhaust waste gate, manifold 90° vertical Preservation
Standard conservation (24 months)
Exhaust turbo charger
Exhaust turbo charger Base frame
Base frame with oil tank, 230/400 V pre-lubrication Combustion air filter and preheating
without preheating CG 170 -20
Suction and Cooling system (biogas applications and tropical conditions) Paint job
Primer, top coat and spare paint: Cat-yellow EATY008 Name plate
name plate in English Crankcase ventilation
Crankcase ventilation / UPF 105 Exhaust pressure monitor
Exhaust back pressure sensor
Spare parts for commisioning
Spare parts for comissioning CAT TEM system Base system TEM
Specification -
Remark
Quantity Description
Base system (CST170F20-F) Frequently chosen options TEM
Heat utilization with heating circuit (HK)
Dump cooling and exhaust bypass control (NK/BY)
Radiator controler (TKS1)
3 CH4 compensation for mutable CH4 concentration, extention package for CH4 ompensation
Modbus RTU (MRTU) 3 Demand of external starting preparations (AES) Visualisation TEM
Operating terminal (BRT-C)
TEM control cabinet, packaging, cables
Console (KBW)
TEM connecting cable set CG 170K/170 15m (K20ARM15) Plant components Batteries
Starter battery in quadruple storage box Zero-pressure gas control train
Gas train DN 150/150/150 (RMG) 3 Non-standard zero-pressure gas train -3 Non-standard zero-pressure gas train Intercooling circuit sensors
Counter flange DN 65 3 Safety valve 3 bar 3 Differential pressure switch 3 Temperature sensor PT 100 3 Water low level switch 3 Ventilation valve 3 Three-way valve DN 65/ PN16, 230 V Engine cooling circuit sensors
Safety valve 3 bar
Differential pressure switch 3 Water low level switch 3 Ventilation valve 3 Electric preheating 9 kW Heating circuit sensors
Remark
Quantity Description
Differential pressure switch 9 Temperature sensor PT 100 Back-up cooling circuit sensors
Counter flange DN 100
Temperature sensor PT 100 3 Water low level switch 3 Ventilation valve 3 Three-way valve DN 100/ PN16, 230 V Cooling water pumps intercooling circuit
Counter flange DN 50 Coolant pump DN 50 Etaline vis kontakter/133 Cooling water pumps engine cooling circuit
Counter flange DN 65 Counter flange set DN 65 Throttle valve DN 65
Coolant pump DN 65 Etaline 065-065-160/162 Expansion vessels intercooling circuit
Expansion vessel 250l
Lock-off valve for expansion tank
Expansion tank manometer Manometer cut-off valve Expansion vessels engine cooling circuit
Expansion vessel 400l Lock-off valve for expansion tank 3 Expansion tank manometer Manometer cut-off valve Services Final inspection
engine test without customer participation Packing
Seaworthy packing for genset: wooden pallet and foil cover 1 packing plant components Standard documentation
Standard documentation (2 copies) incl. preparation
Available for sale. New 2000kW New unused Caterpillar CG170-20 Natural Gas Industrial Generator Sets. Rated at 2000 kw, 50 Hz, 10500 V / 400V ,500 RPM. Year 2018, 0 hours since new. CAT warranty.
Ready to dispatch from the stock. Contact us details.
Газопоршневая электростанция CAT CG170-20 натуральный газ. Новые без наработки. Наличие на складе .
----
Genset Base engine-
Base engine CG170-20 50Hz Base alternator
Standard alternator n = 1,500 / min Base genset
Base genset Natural gas 50Hz, MV, Marelli Exhaust gas outlet
Exhaust manifold with Exhaust waste gate, manifold 90° vertical Preservation
Standard conservation (24 months)
Exhaust turbo charger
Exhaust turbo charger Base frame
Base frame with oil tank, 230/400 V pre-lubrication Combustion air filter and preheating
without preheating CG 170 -20
Suction and Cooling system (biogas applications and tropical conditions) Paint job
Primer, top coat and spare paint: Cat-yellow EATY008 Name plate
name plate in English Crankcase ventilation
Crankcase ventilation / UPF 105 Exhaust pressure monitor
Exhaust back pressure sensor
Spare parts for commisioning
Spare parts for comissioning CAT TEM system Base system TEM
Specification -
Remark
Quantity Description
Base system (CST170F20-F) Frequently chosen options TEM
Heat utilization with heating circuit (HK)
Dump cooling and exhaust bypass control (NK/BY)
Radiator controler (TKS1)
3 CH4 compensation for mutable CH4 concentration, extention package for CH4 ompensation
Modbus RTU (MRTU) 3 Demand of external starting preparations (AES) Visualisation TEM
Operating terminal (BRT-C)
TEM control cabinet, packaging, cables
Console (KBW)
TEM connecting cable set CG 170K/170 15m (K20ARM15) Plant components Batteries
Starter battery in quadruple storage box Zero-pressure gas control train
Gas train DN 150/150/150 (RMG) 3 Non-standard zero-pressure gas train -3 Non-standard zero-pressure gas train Intercooling circuit sensors
Counter flange DN 65 3 Safety valve 3 bar 3 Differential pressure switch 3 Temperature sensor PT 100 3 Water low level switch 3 Ventilation valve 3 Three-way valve DN 65/ PN16, 230 V Engine cooling circuit sensors
Safety valve 3 bar
Differential pressure switch 3 Water low level switch 3 Ventilation valve 3 Electric preheating 9 kW Heating circuit sensors
Remark
Quantity Description
Differential pressure switch 9 Temperature sensor PT 100 Back-up cooling circuit sensors
Counter flange DN 100
Temperature sensor PT 100 3 Water low level switch 3 Ventilation valve 3 Three-way valve DN 100/ PN16, 230 V Cooling water pumps intercooling circuit
Counter flange DN 50 Coolant pump DN 50 Etaline vis kontakter/133 Cooling water pumps engine cooling circuit
Counter flange DN 65 Counter flange set DN 65 Throttle valve DN 65
Coolant pump DN 65 Etaline 065-065-160/162 Expansion vessels intercooling circuit
Expansion vessel 250l
Lock-off valve for expansion tank
Expansion tank manometer Manometer cut-off valve Expansion vessels engine cooling circuit
Expansion vessel 400l Lock-off valve for expansion tank 3 Expansion tank manometer Manometer cut-off valve Services Final inspection
engine test without customer participation Packing
Seaworthy packing for genset: wooden pallet and foil cover 1 packing plant components Standard documentation
Standard documentation (2 copies) incl. preparation
Available for sale. New 2000kW New unused Caterpillar CG170-20 Natural Gas Industrial Generator Sets. Rated at 2000 kw, 50 Hz, 10500 V / 400V ,500 RPM. Year 2018, 0 hours since new. CAT warranty.
Ready to dispatch from the stock. Contact us details.
Газопоршневая электростанция CAT CG170-20 натуральный газ. Новые без наработки. Наличие на складе .
----
Genset Base engine-
Base engine CG170-20 50Hz Base alternator
Standard alternator n = 1,500 / min Base genset
Base genset Natural gas 50Hz, MV, Marelli Exhaust gas outlet
Exhaust manifold with Exhaust waste gate, manifold 90° vertical Preservation
Standard conservation (24 months)
Exhaust turbo charger
Exhaust turbo charger Base frame
Base frame with oil tank, 230/400 V pre-lubrication Combustion air filter and preheating
without preheating CG 170 -20
Suction and Cooling system (biogas applications and tropical conditions) Paint job
Primer, top coat and spare paint: Cat-yellow EATY008 Name plate
name plate in English Crankcase ventilation
Crankcase ventilation / UPF 105 Exhaust pressure monitor
Exhaust back pressure sensor
Spare parts for commisioning
Spare parts for comissioning CAT TEM system Base system TEM
Specification -
Remark
Quantity Description
Base system (CST170F20-F) Frequently chosen options TEM
Heat utilization with heating circuit (HK)
Dump cooling and exhaust bypass control (NK/BY)
Radiator controler (TKS1)
3 CH4 compensation for mutable CH4 concentration, extention package for CH4 ompensation
Modbus RTU (MRTU) 3 Demand of external starting preparations (AES) Visualisation TEM
Operating terminal (BRT-C)
TEM control cabinet, packaging, cables
Console (KBW)
TEM connecting cable set CG 170K/170 15m (K20ARM15) Plant components Batteries
Starter battery in quadruple storage box Zero-pressure gas control train
Gas train DN 150/150/150 (RMG) 3 Non-standard zero-pressure gas train -3 Non-standard zero-pressure gas train Intercooling circuit sensors
Counter flange DN 65 3 Safety valve 3 bar 3 Differential pressure switch 3 Temperature sensor PT 100 3 Water low level switch 3 Ventilation valve 3 Three-way valve DN 65/ PN16, 230 V Engine cooling circuit sensors
Safety valve 3 bar
Differential pressure switch 3 Water low level switch 3 Ventilation valve 3 Electric preheating 9 kW Heating circuit sensors
Remark
Quantity Description
Differential pressure switch 9 Temperature sensor PT 100 Back-up cooling circuit sensors
Counter flange DN 100
Temperature sensor PT 100 3 Water low level switch 3 Ventilation valve 3 Three-way valve DN 100/ PN16, 230 V Cooling water pumps intercooling circuit
Counter flange DN 50 Coolant pump DN 50 Etaline vis kontakter/133 Cooling water pumps engine cooling circuit
Counter flange DN 65 Counter flange set DN 65 Throttle valve DN 65
Coolant pump DN 65 Etaline 065-065-160/162 Expansion vessels intercooling circuit
Expansion vessel 250l
Lock-off valve for expansion tank
Expansion tank manometer Manometer cut-off valve Expansion vessels engine cooling circuit
Expansion vessel 400l Lock-off valve for expansion tank 3 Expansion tank manometer Manometer cut-off valve Services Final inspection
engine test without customer participation Packing
Seaworthy packing for genset: wooden pallet and foil cover 1 packing plant components Standard documentation
Standard documentation (2 copies) incl. preparation
Available for sale. New 2000kW New unused Caterpillar CG170-20 Natural Gas Industrial Generator Sets. Rated at 2000 kw, 50 Hz, 10500 V / 400V ,500 RPM. Year 2018, 0 hours since new. CAT warranty.
Ready to dispatch from the stock. Contact us details.
Газопоршневая электростанция CAT CG170-20 натуральный газ. Новые без наработки. Наличие на складе .
----
Genset Base engine-
Base engine CG170-20 50Hz Base alternator
Standard alternator n = 1,500 / min Base genset
Base genset Natural gas 50Hz, MV, Marelli Exhaust gas outlet
Exhaust manifold with Exhaust waste gate, manifold 90° vertical Preservation
Standard conservation (24 months)
Exhaust turbo charger
Exhaust turbo charger Base frame
Base frame with oil tank, 230/400 V pre-lubrication Combustion air filter and preheating
without preheating CG 170 -20
Suction and Cooling system (biogas applications and tropical conditions) Paint job
Primer, top coat and spare paint: Cat-yellow EATY008 Name plate
name plate in English Crankcase ventilation
Crankcase ventilation / UPF 105 Exhaust pressure monitor
Exhaust back pressure sensor
Spare parts for commisioning
Spare parts for comissioning CAT TEM system Base system TEM
Specification -
Remark
Quantity Description
Base system (CST170F20-F) Frequently chosen options TEM
Heat utilization with heating circuit (HK)
Dump cooling and exhaust bypass control (NK/BY)
Radiator controler (TKS1)
3 CH4 compensation for mutable CH4 concentration, extention package for CH4 ompensation
Modbus RTU (MRTU) 3 Demand of external starting preparations (AES) Visualisation TEM
Operating terminal (BRT-C)
TEM control cabinet, packaging, cables
Console (KBW)
TEM connecting cable set CG 170K/170 15m (K20ARM15) Plant components Batteries
Starter battery in quadruple storage box Zero-pressure gas control train
Gas train DN 150/150/150 (RMG) 3 Non-standard zero-pressure gas train -3 Non-standard zero-pressure gas train Intercooling circuit sensors
Counter flange DN 65 3 Safety valve 3 bar 3 Differential pressure switch 3 Temperature sensor PT 100 3 Water low level switch 3 Ventilation valve 3 Three-way valve DN 65/ PN16, 230 V Engine cooling circuit sensors
Safety valve 3 bar
Differential pressure switch 3 Water low level switch 3 Ventilation valve 3 Electric preheating 9 kW Heating circuit sensors
Remark
Quantity Description
Differential pressure switch 9 Temperature sensor PT 100 Back-up cooling circuit sensors
Counter flange DN 100
Temperature sensor PT 100 3 Water low level switch 3 Ventilation valve 3 Three-way valve DN 100/ PN16, 230 V Cooling water pumps intercooling circuit
Counter flange DN 50 Coolant pump DN 50 Etaline vis kontakter/133 Cooling water pumps engine cooling circuit
Counter flange DN 65 Counter flange set DN 65 Throttle valve DN 65
Coolant pump DN 65 Etaline 065-065-160/162 Expansion vessels intercooling circuit
Expansion vessel 250l
Lock-off valve for expansion tank
Expansion tank manometer Manometer cut-off valve Expansion vessels engine cooling circuit
Expansion vessel 400l Lock-off valve for expansion tank 3 Expansion tank manometer Manometer cut-off valve Services Final inspection
engine test without customer participation Packing
Seaworthy packing for genset: wooden pallet and foil cover 1 packing plant components Standard documentation
Standard documentation (2 copies) incl. preparation
Available for sale. New 2000kW New unused Caterpillar CG170-20 Natural Gas Industrial Generator Sets. Rated at 2000 kw, 50 Hz, 10500 V / 400V ,500 RPM. Year 2018, 0 hours since new. CAT warranty.
Ready to dispatch from the stock. Contact us details.
Газопоршневая электростанция CAT CG170-20 натуральный газ. Новые без наработки. Наличие на складе .
----
Genset Base engine-
Base engine CG170-20 50Hz Base alternator
Standard alternator n = 1,500 / min Base genset
Base genset Natural gas 50Hz, MV, Marelli Exhaust gas outlet
Exhaust manifold with Exhaust waste gate, manifold 90° vertical Preservation
Standard conservation (24 months)
Exhaust turbo charger
Exhaust turbo charger Base frame
Base frame with oil tank, 230/400 V pre-lubrication Combustion air filter and preheating
without preheating CG 170 -20
Suction and Cooling system (biogas applications and tropical conditions) Paint job
Primer, top coat and spare paint: Cat-yellow EATY008 Name plate
name plate in English Crankcase ventilation
Crankcase ventilation / UPF 105 Exhaust pressure monitor
Exhaust back pressure sensor
Spare parts for commisioning
Spare parts for comissioning CAT TEM system Base system TEM
Specification -
Remark
Quantity Description
Base system (CST170F20-F) Frequently chosen options TEM
Heat utilization with heating circuit (HK)
Dump cooling and exhaust bypass control (NK/BY)
Radiator controler (TKS1)
3 CH4 compensation for mutable CH4 concentration, extention package for CH4 ompensation
Modbus RTU (MRTU) 3 Demand of external starting preparations (AES) Visualisation TEM
Operating terminal (BRT-C)
TEM control cabinet, packaging, cables
Console (KBW)
TEM connecting cable set CG 170K/170 15m (K20ARM15) Plant components Batteries
Starter battery in quadruple storage box Zero-pressure gas control train
Gas train DN 150/150/150 (RMG) 3 Non-standard zero-pressure gas train -3 Non-standard zero-pressure gas train Intercooling circuit sensors
Counter flange DN 65 3 Safety valve 3 bar 3 Differential pressure switch 3 Temperature sensor PT 100 3 Water low level switch 3 Ventilation valve 3 Three-way valve DN 65/ PN16, 230 V Engine cooling circuit sensors
Safety valve 3 bar
Differential pressure switch 3 Water low level switch 3 Ventilation valve 3 Electric preheating 9 kW Heating circuit sensors
Remark
Quantity Description
Differential pressure switch 9 Temperature sensor PT 100 Back-up cooling circuit sensors
Counter flange DN 100
Temperature sensor PT 100 3 Water low level switch 3 Ventilation valve 3 Three-way valve DN 100/ PN16, 230 V Cooling water pumps intercooling circuit
Counter flange DN 50 Coolant pump DN 50 Etaline vis kontakter/133 Cooling water pumps engine cooling circuit
Counter flange DN 65 Counter flange set DN 65 Throttle valve DN 65
Coolant pump DN 65 Etaline 065-065-160/162 Expansion vessels intercooling circuit
Expansion vessel 250l
Lock-off valve for expansion tank
Expansion tank manometer Manometer cut-off valve Expansion vessels engine cooling circuit
Expansion vessel 400l Lock-off valve for expansion tank 3 Expansion tank manometer Manometer cut-off valve Services Final inspection
engine test without customer participation Packing
Seaworthy packing for genset: wooden pallet and foil cover 1 packing plant components Standard documentation
Standard documentation (2 copies) incl. preparation
Available for sale. New 2000kW New unused Caterpillar CG170-20 Natural Gas Industrial Generator Sets. Rated at 2000 kw, 50 Hz, 10500 V / 400V ,500 RPM. Year 2018, 0 hours since new. CAT warranty.
Ready to dispatch from the stock. Contact us details.
Газопоршневая электростанция CAT CG170-20 натуральный газ. Новые без наработки. Наличие на складе .
----
Genset Base engine-
Base engine CG170-20 50Hz Base alternator
Standard alternator n = 1,500 / min Base genset
Base genset Natural gas 50Hz, MV, Marelli Exhaust gas outlet
Exhaust manifold with Exhaust waste gate, manifold 90° vertical Preservation
Standard conservation (24 months)
Exhaust turbo charger
Exhaust turbo charger Base frame
Base frame with oil tank, 230/400 V pre-lubrication Combustion air filter and preheating
without preheating CG 170 -20
Suction and Cooling system (biogas applications and tropical conditions) Paint job
Primer, top coat and spare paint: Cat-yellow EATY008 Name plate
name plate in English Crankcase ventilation
Crankcase ventilation / UPF 105 Exhaust pressure monitor
Exhaust back pressure sensor
Spare parts for commisioning
Spare parts for comissioning CAT TEM system Base system TEM
Specification -
Remark
Quantity Description
Base system (CST170F20-F) Frequently chosen options TEM
Heat utilization with heating circuit (HK)
Dump cooling and exhaust bypass control (NK/BY)
Radiator controler (TKS1)
3 CH4 compensation for mutable CH4 concentration, extention package for CH4 ompensation
Modbus RTU (MRTU) 3 Demand of external starting preparations (AES) Visualisation TEM
Operating terminal (BRT-C)
TEM control cabinet, packaging, cables
Console (KBW)
TEM connecting cable set CG 170K/170 15m (K20ARM15) Plant components Batteries
Starter battery in quadruple storage box Zero-pressure gas control train
Gas train DN 150/150/150 (RMG) 3 Non-standard zero-pressure gas train -3 Non-standard zero-pressure gas train Intercooling circuit sensors
Counter flange DN 65 3 Safety valve 3 bar 3 Differential pressure switch 3 Temperature sensor PT 100 3 Water low level switch 3 Ventilation valve 3 Three-way valve DN 65/ PN16, 230 V Engine cooling circuit sensors
Safety valve 3 bar
Differential pressure switch 3 Water low level switch 3 Ventilation valve 3 Electric preheating 9 kW Heating circuit sensors
Remark
Quantity Description
Differential pressure switch 9 Temperature sensor PT 100 Back-up cooling circuit sensors
Counter flange DN 100
Temperature sensor PT 100 3 Water low level switch 3 Ventilation valve 3 Three-way valve DN 100/ PN16, 230 V Cooling water pumps intercooling circuit
Counter flange DN 50 Coolant pump DN 50 Etaline vis kontakter/133 Cooling water pumps engine cooling circuit
Counter flange DN 65 Counter flange set DN 65 Throttle valve DN 65
Coolant pump DN 65 Etaline 065-065-160/162 Expansion vessels intercooling circuit
Expansion vessel 250l
Lock-off valve for expansion tank
Expansion tank manometer Manometer cut-off valve Expansion vessels engine cooling circuit
Expansion vessel 400l Lock-off valve for expansion tank 3 Expansion tank manometer Manometer cut-off valve Services Final inspection
engine test without customer participation Packing
Seaworthy packing for genset: wooden pallet and foil cover 1 packing plant components Standard documentation
Standard documentation (2 copies) incl. preparation
Available for sale. New 2000kW New unused Caterpillar CG170-20 Natural Gas Industrial Generator Sets. Rated at 2000 kw, 50 Hz, 10500 V / 400V ,500 RPM. Year 2018, 0 hours since new. CAT warranty.
Ready to dispatch from the stock. Contact us details.
Газопоршневая электростанция CAT CG170-20 натуральный газ. Новые без наработки. Наличие на складе .
----
Genset Base engine-
Base engine CG170-20 50Hz Base alternator
Standard alternator n = 1,500 / min Base genset
Base genset Natural gas 50Hz, MV, Marelli Exhaust gas outlet
Exhaust manifold with Exhaust waste gate, manifold 90° vertical Preservation
Standard conservation (24 months)
Exhaust turbo charger
Exhaust turbo charger Base frame
Base frame with oil tank, 230/400 V pre-lubrication Combustion air filter and preheating
without preheating CG 170 -20
Suction and Cooling system (biogas applications and tropical conditions) Paint job
Primer, top coat and spare paint: Cat-yellow EATY008 Name plate
name plate in English Crankcase ventilation
Crankcase ventilation / UPF 105 Exhaust pressure monitor
Exhaust back pressure sensor
Spare parts for commisioning
Spare parts for comissioning CAT TEM system Base system TEM
Specification -
Remark
Quantity Description
Base system (CST170F20-F) Frequently chosen options TEM
Heat utilization with heating circuit (HK)
Dump cooling and exhaust bypass control (NK/BY)
Radiator controler (TKS1)
3 CH4 compensation for mutable CH4 concentration, extention package for CH4 ompensation
Modbus RTU (MRTU) 3 Demand of external starting preparations (AES) Visualisation TEM
Operating terminal (BRT-C)
TEM control cabinet, packaging, cables
Console (KBW)
TEM connecting cable set CG 170K/170 15m (K20ARM15) Plant components Batteries
Starter battery in quadruple storage box Zero-pressure gas control train
Gas train DN 150/150/150 (RMG) 3 Non-standard zero-pressure gas train -3 Non-standard zero-pressure gas train Intercooling circuit sensors
Counter flange DN 65 3 Safety valve 3 bar 3 Differential pressure switch 3 Temperature sensor PT 100 3 Water low level switch 3 Ventilation valve 3 Three-way valve DN 65/ PN16, 230 V Engine cooling circuit sensors
Safety valve 3 bar
Differential pressure switch 3 Water low level switch 3 Ventilation valve 3 Electric preheating 9 kW Heating circuit sensors
Remark
Quantity Description
Differential pressure switch 9 Temperature sensor PT 100 Back-up cooling circuit sensors
Counter flange DN 100
Temperature sensor PT 100 3 Water low level switch 3 Ventilation valve 3 Three-way valve DN 100/ PN16, 230 V Cooling water pumps intercooling circuit
Counter flange DN 50 Coolant pump DN 50 Etaline vis kontakter/133 Cooling water pumps engine cooling circuit
Counter flange DN 65 Counter flange set DN 65 Throttle valve DN 65
Coolant pump DN 65 Etaline 065-065-160/162 Expansion vessels intercooling circuit
Expansion vessel 250l
Lock-off valve for expansion tank
Expansion tank manometer Manometer cut-off valve Expansion vessels engine cooling circuit
Expansion vessel 400l Lock-off valve for expansion tank 3 Expansion tank manometer Manometer cut-off valve Services Final inspection
engine test without customer participation Packing
Seaworthy packing for genset: wooden pallet and foil cover 1 packing plant components Standard documentation
Standard documentation (2 copies) incl. preparation
Available for sale. New 2000kW New unused Caterpillar CG170-20 Natural Gas Industrial Generator Sets. Rated at 2000 kw, 50 Hz, 10500 V / 400V ,500 RPM. Year 2018, 0 hours since new. CAT warranty.
Ready to dispatch from the stock. Contact us details.
Газопоршневая электростанция CAT CG170-20 натуральный газ. Новые без наработки. Наличие на складе .
----
Genset Base engine-
Base engine CG170-20 50Hz Base alternator
Standard alternator n = 1,500 / min Base genset
Base genset Natural gas 50Hz, MV, Marelli Exhaust gas outlet
Exhaust manifold with Exhaust waste gate, manifold 90° vertical Preservation
Standard conservation (24 months)
Exhaust turbo charger
Exhaust turbo charger Base frame
Base frame with oil tank, 230/400 V pre-lubrication Combustion air filter and preheating
without preheating CG 170 -20
Suction and Cooling system (biogas applications and tropical conditions) Paint job
Primer, top coat and spare paint: Cat-yellow EATY008 Name plate
name plate in English Crankcase ventilation
Crankcase ventilation / UPF 105 Exhaust pressure monitor
Exhaust back pressure sensor
Spare parts for commisioning
Spare parts for comissioning CAT TEM system Base system TEM
Specification -
Remark
Quantity Description
Base system (CST170F20-F) Frequently chosen options TEM
Heat utilization with heating circuit (HK)
Dump cooling and exhaust bypass control (NK/BY)
Radiator controler (TKS1)
3 CH4 compensation for mutable CH4 concentration, extention package for CH4 ompensation
Modbus RTU (MRTU) 3 Demand of external starting preparations (AES) Visualisation TEM
Operating terminal (BRT-C)
TEM control cabinet, packaging, cables
Console (KBW)
TEM connecting cable set CG 170K/170 15m (K20ARM15) Plant components Batteries
Starter battery in quadruple storage box Zero-pressure gas control train
Gas train DN 150/150/150 (RMG) 3 Non-standard zero-pressure gas train -3 Non-standard zero-pressure gas train Intercooling circuit sensors
Counter flange DN 65 3 Safety valve 3 bar 3 Differential pressure switch 3 Temperature sensor PT 100 3 Water low level switch 3 Ventilation valve 3 Three-way valve DN 65/ PN16, 230 V Engine cooling circuit sensors
Safety valve 3 bar
Differential pressure switch 3 Water low level switch 3 Ventilation valve 3 Electric preheating 9 kW Heating circuit sensors
Remark
Quantity Description
Differential pressure switch 9 Temperature sensor PT 100 Back-up cooling circuit sensors
Counter flange DN 100
Temperature sensor PT 100 3 Water low level switch 3 Ventilation valve 3 Three-way valve DN 100/ PN16, 230 V Cooling water pumps intercooling circuit
Counter flange DN 50 Coolant pump DN 50 Etaline vis kontakter/133 Cooling water pumps engine cooling circuit
Counter flange DN 65 Counter flange set DN 65 Throttle valve DN 65
Coolant pump DN 65 Etaline 065-065-160/162 Expansion vessels intercooling circuit
Expansion vessel 250l
Lock-off valve for expansion tank
Expansion tank manometer Manometer cut-off valve Expansion vessels engine cooling circuit
Expansion vessel 400l Lock-off valve for expansion tank 3 Expansion tank manometer Manometer cut-off valve Services Final inspection
engine test without customer participation Packing
Seaworthy packing for genset: wooden pallet and foil cover 1 packing plant components Standard documentation
Standard documentation (2 copies) incl. preparation
Available for sale. New 2000kW New unused Caterpillar CG170-20 Natural Gas Industrial Generator Sets. Rated at 2000 kw, 50 Hz, 10500 V / 400V ,500 RPM. Year 2018, 0 hours since new. CAT warranty.
Ready to dispatch from the stock. Contact us details.
Газопоршневая электростанция CAT CG170-20 натуральный газ. Новые без наработки. Наличие на складе .
----
Genset Base engine-
Base engine CG170-20 50Hz Base alternator
Standard alternator n = 1,500 / min Base genset
Base genset Natural gas 50Hz, MV, Marelli Exhaust gas outlet
Exhaust manifold with Exhaust waste gate, manifold 90° vertical Preservation
Standard conservation (24 months)
Exhaust turbo charger
Exhaust turbo charger Base frame
Base frame with oil tank, 230/400 V pre-lubrication Combustion air filter and preheating
without preheating CG 170 -20
Suction and Cooling system (biogas applications and tropical conditions) Paint job
Primer, top coat and spare paint: Cat-yellow EATY008 Name plate
name plate in English Crankcase ventilation
Crankcase ventilation / UPF 105 Exhaust pressure monitor
Exhaust back pressure sensor
Spare parts for commisioning
Spare parts for comissioning CAT TEM system Base system TEM
Specification -
Remark
Quantity Description
Base system (CST170F20-F) Frequently chosen options TEM
Heat utilization with heating circuit (HK)
Dump cooling and exhaust bypass control (NK/BY)
Radiator controler (TKS1)
3 CH4 compensation for mutable CH4 concentration, extention package for CH4 ompensation
Modbus RTU (MRTU) 3 Demand of external starting preparations (AES) Visualisation TEM
Operating terminal (BRT-C)
TEM control cabinet, packaging, cables
Console (KBW)
TEM connecting cable set CG 170K/170 15m (K20ARM15) Plant components Batteries
Starter battery in quadruple storage box Zero-pressure gas control train
Gas train DN 150/150/150 (RMG) 3 Non-standard zero-pressure gas train -3 Non-standard zero-pressure gas train Intercooling circuit sensors
Counter flange DN 65 3 Safety valve 3 bar 3 Differential pressure switch 3 Temperature sensor PT 100 3 Water low level switch 3 Ventilation valve 3 Three-way valve DN 65/ PN16, 230 V Engine cooling circuit sensors
Safety valve 3 bar
Differential pressure switch 3 Water low level switch 3 Ventilation valve 3 Electric preheating 9 kW Heating circuit sensors
Remark
Quantity Description
Differential pressure switch 9 Temperature sensor PT 100 Back-up cooling circuit sensors
Counter flange DN 100
Temperature sensor PT 100 3 Water low level switch 3 Ventilation valve 3 Three-way valve DN 100/ PN16, 230 V Cooling water pumps intercooling circuit
Counter flange DN 50 Coolant pump DN 50 Etaline vis kontakter/133 Cooling water pumps engine cooling circuit
Counter flange DN 65 Counter flange set DN 65 Throttle valve DN 65
Coolant pump DN 65 Etaline 065-065-160/162 Expansion vessels intercooling circuit
Expansion vessel 250l
Lock-off valve for expansion tank
Expansion tank manometer Manometer cut-off valve Expansion vessels engine cooling circuit
Expansion vessel 400l Lock-off valve for expansion tank 3 Expansion tank manometer Manometer cut-off valve Services Final inspection
engine test without customer participation Packing
Seaworthy packing for genset: wooden pallet and foil cover 1 packing plant components Standard documentation
Standard documentation (2 copies) incl. preparation
Available for sale. New 2000kW New unused Caterpillar CG170-20 Natural Gas Industrial Generator Sets. Rated at 2000 kw, 50 Hz, 10500 V / 400V ,500 RPM. Year 2018, 0 hours since new. CAT warranty.
Ready to dispatch from the stock. Contact us details.
Газопоршневая электростанция CAT CG170-20 натуральный газ. Новые без наработки. Наличие на складе .
----
Genset Base engine-
Base engine CG170-20 50Hz Base alternator
Standard alternator n = 1,500 / min Base genset
Base genset Natural gas 50Hz, MV, Marelli Exhaust gas outlet
Exhaust manifold with Exhaust waste gate, manifold 90° vertical Preservation
Standard conservation (24 months)
Exhaust turbo charger
Exhaust turbo charger Base frame
Base frame with oil tank, 230/400 V pre-lubrication Combustion air filter and preheating
without preheating CG 170 -20
Suction and Cooling system (biogas applications and tropical conditions) Paint job
Primer, top coat and spare paint: Cat-yellow EATY008 Name plate
name plate in English Crankcase ventilation
Crankcase ventilation / UPF 105 Exhaust pressure monitor
Exhaust back pressure sensor
Spare parts for commisioning
Spare parts for comissioning CAT TEM system Base system TEM
Specification -
Remark
Quantity Description
Base system (CST170F20-F) Frequently chosen options TEM
Heat utilization with heating circuit (HK)
Dump cooling and exhaust bypass control (NK/BY)
Radiator controler (TKS1)
3 CH4 compensation for mutable CH4 concentration, extention package for CH4 ompensation
Modbus RTU (MRTU) 3 Demand of external starting preparations (AES) Visualisation TEM
Operating terminal (BRT-C)
TEM control cabinet, packaging, cables
Console (KBW)
TEM connecting cable set CG 170K/170 15m (K20ARM15) Plant components Batteries
Starter battery in quadruple storage box Zero-pressure gas control train
Gas train DN 150/150/150 (RMG) 3 Non-standard zero-pressure gas train -3 Non-standard zero-pressure gas train Intercooling circuit sensors
Counter flange DN 65 3 Safety valve 3 bar 3 Differential pressure switch 3 Temperature sensor PT 100 3 Water low level switch 3 Ventilation valve 3 Three-way valve DN 65/ PN16, 230 V Engine cooling circuit sensors
Safety valve 3 bar
Differential pressure switch 3 Water low level switch 3 Ventilation valve 3 Electric preheating 9 kW Heating circuit sensors
Remark
Quantity Description
Differential pressure switch 9 Temperature sensor PT 100 Back-up cooling circuit sensors
Counter flange DN 100
Temperature sensor PT 100 3 Water low level switch 3 Ventilation valve 3 Three-way valve DN 100/ PN16, 230 V Cooling water pumps intercooling circuit
Counter flange DN 50 Coolant pump DN 50 Etaline vis kontakter/133 Cooling water pumps engine cooling circuit
Counter flange DN 65 Counter flange set DN 65 Throttle valve DN 65
Coolant pump DN 65 Etaline 065-065-160/162 Expansion vessels intercooling circuit
Expansion vessel 250l
Lock-off valve for expansion tank
Expansion tank manometer Manometer cut-off valve Expansion vessels engine cooling circuit
Expansion vessel 400l Lock-off valve for expansion tank 3 Expansion tank manometer Manometer cut-off valve Services Final inspection
engine test without customer participation Packing
Seaworthy packing for genset: wooden pallet and foil cover 1 packing plant components Standard documentation
Standard documentation (2 copies) incl. preparation
Available for sale. New 2000kW New unused Caterpillar CG170-20 Natural Gas Industrial Generator Sets. Rated at 2000 kw, 50 Hz, 10500 V / 400V ,500 RPM. Year 2018, 0 hours since new. CAT warranty.
Ready to dispatch from the stock. Contact us details.
Газопоршневая электростанция CAT CG170-20 натуральный газ. Новые без наработки. Наличие на складе .
----
Genset Base engine-
Base engine CG170-20 50Hz Base alternator
Standard alternator n = 1,500 / min Base genset
Base genset Natural gas 50Hz, MV, Marelli Exhaust gas outlet
Exhaust manifold with Exhaust waste gate, manifold 90° vertical Preservation
Standard conservation (24 months)
Exhaust turbo charger
Exhaust turbo charger Base frame
Base frame with oil tank, 230/400 V pre-lubrication Combustion air filter and preheating
without preheating CG 170 -20
Suction and Cooling system (biogas applications and tropical conditions) Paint job
Primer, top coat and spare paint: Cat-yellow EATY008 Name plate
name plate in English Crankcase ventilation
Crankcase ventilation / UPF 105 Exhaust pressure monitor
Exhaust back pressure sensor
Spare parts for commisioning
Spare parts for comissioning CAT TEM system Base system TEM
Specification -
Remark
Quantity Description
Base system (CST170F20-F) Frequently chosen options TEM
Heat utilization with heating circuit (HK)
Dump cooling and exhaust bypass control (NK/BY)
Radiator controler (TKS1)
3 CH4 compensation for mutable CH4 concentration, extention package for CH4 ompensation
Modbus RTU (MRTU) 3 Demand of external starting preparations (AES) Visualisation TEM
Operating terminal (BRT-C)
TEM control cabinet, packaging, cables
Console (KBW)
TEM connecting cable set CG 170K/170 15m (K20ARM15) Plant components Batteries
Starter battery in quadruple storage box Zero-pressure gas control train
Gas train DN 150/150/150 (RMG) 3 Non-standard zero-pressure gas train -3 Non-standard zero-pressure gas train Intercooling circuit sensors
Counter flange DN 65 3 Safety valve 3 bar 3 Differential pressure switch 3 Temperature sensor PT 100 3 Water low level switch 3 Ventilation valve 3 Three-way valve DN 65/ PN16, 230 V Engine cooling circuit sensors
Safety valve 3 bar
Differential pressure switch 3 Water low level switch 3 Ventilation valve 3 Electric preheating 9 kW Heating circuit sensors
Remark
Quantity Description
Differential pressure switch 9 Temperature sensor PT 100 Back-up cooling circuit sensors
Counter flange DN 100
Temperature sensor PT 100 3 Water low level switch 3 Ventilation valve 3 Three-way valve DN 100/ PN16, 230 V Cooling water pumps intercooling circuit
Counter flange DN 50 Coolant pump DN 50 Etaline vis kontakter/133 Cooling water pumps engine cooling circuit
Counter flange DN 65 Counter flange set DN 65 Throttle valve DN 65
Coolant pump DN 65 Etaline 065-065-160/162 Expansion vessels intercooling circuit
Expansion vessel 250l
Lock-off valve for expansion tank
Expansion tank manometer Manometer cut-off valve Expansion vessels engine cooling circuit
Expansion vessel 400l Lock-off valve for expansion tank 3 Expansion tank manometer Manometer cut-off valve Services Final inspection
engine test without customer participation Packing
Seaworthy packing for genset: wooden pallet and foil cover 1 packing plant components Standard documentation
Standard documentation (2 copies) incl. preparation
Available for sale. New 2000kW New unused Caterpillar CG170-20 Natural Gas Industrial Generator Sets. Rated at 2000 kw, 50 Hz, 10500 V / 400V ,500 RPM. Year 2018, 0 hours since new. CAT warranty.
Ready to dispatch from the stock. Contact us details.
Газопоршневая электростанция CAT CG170-20 натуральный газ. Новые без наработки. Наличие на складе .
----
Genset Base engine-
Base engine CG170-20 50Hz Base alternator
Standard alternator n = 1,500 / min Base genset
Base genset Natural gas 50Hz, MV, Marelli Exhaust gas outlet
Exhaust manifold with Exhaust waste gate, manifold 90° vertical Preservation
Standard conservation (24 months)
Exhaust turbo charger
Exhaust turbo charger Base frame
Base frame with oil tank, 230/400 V pre-lubrication Combustion air filter and preheating
without preheating CG 170 -20
Suction and Cooling system (biogas applications and tropical conditions) Paint job
Primer, top coat and spare paint: Cat-yellow EATY008 Name plate
name plate in English Crankcase ventilation
Crankcase ventilation / UPF 105 Exhaust pressure monitor
Exhaust back pressure sensor
Spare parts for commisioning
Spare parts for comissioning CAT TEM system Base system TEM
Specification -
Remark
Quantity Description
Base system (CST170F20-F) Frequently chosen options TEM
Heat utilization with heating circuit (HK)
Dump cooling and exhaust bypass control (NK/BY)
Radiator controler (TKS1)
3 CH4 compensation for mutable CH4 concentration, extention package for CH4 ompensation
Modbus RTU (MRTU) 3 Demand of external starting preparations (AES) Visualisation TEM
Operating terminal (BRT-C)
TEM control cabinet, packaging, cables
Console (KBW)
TEM connecting cable set CG 170K/170 15m (K20ARM15) Plant components Batteries
Starter battery in quadruple storage box Zero-pressure gas control train
Gas train DN 150/150/150 (RMG) 3 Non-standard zero-pressure gas train -3 Non-standard zero-pressure gas train Intercooling circuit sensors
Counter flange DN 65 3 Safety valve 3 bar 3 Differential pressure switch 3 Temperature sensor PT 100 3 Water low level switch 3 Ventilation valve 3 Three-way valve DN 65/ PN16, 230 V Engine cooling circuit sensors
Safety valve 3 bar
Differential pressure switch 3 Water low level switch 3 Ventilation valve 3 Electric preheating 9 kW Heating circuit sensors
Remark
Quantity Description
Differential pressure switch 9 Temperature sensor PT 100 Back-up cooling circuit sensors
Counter flange DN 100
Temperature sensor PT 100 3 Water low level switch 3 Ventilation valve 3 Three-way valve DN 100/ PN16, 230 V Cooling water pumps intercooling circuit
Counter flange DN 50 Coolant pump DN 50 Etaline vis kontakter/133 Cooling water pumps engine cooling circuit
Counter flange DN 65 Counter flange set DN 65 Throttle valve DN 65
Coolant pump DN 65 Etaline 065-065-160/162 Expansion vessels intercooling circuit
Expansion vessel 250l
Lock-off valve for expansion tank
Expansion tank manometer Manometer cut-off valve Expansion vessels engine cooling circuit
Expansion vessel 400l Lock-off valve for expansion tank 3 Expansion tank manometer Manometer cut-off valve Services Final inspection
engine test without customer participation Packing
Seaworthy packing for genset: wooden pallet and foil cover 1 packing plant components Standard documentation
Standard documentation (2 copies) incl. preparation
Available for sale. New 2000kW New unused Caterpillar CG170-20 Natural Gas Industrial Generator Sets. Rated at 2000 kw, 50 Hz, 10500 V / 400V ,500 RPM. Year 2018, 0 hours since new. CAT warranty.
Ready to dispatch from the stock. Contact us details.
Газопоршневая электростанция CAT CG170-20 натуральный газ. Новые без наработки. Наличие на складе .
----
Genset Base engine-
Base engine CG170-20 50Hz Base alternator
Standard alternator n = 1,500 / min Base genset
Base genset Natural gas 50Hz, MV, Marelli Exhaust gas outlet
Exhaust manifold with Exhaust waste gate, manifold 90° vertical Preservation
Standard conservation (24 months)
Exhaust turbo charger
Exhaust turbo charger Base frame
Base frame with oil tank, 230/400 V pre-lubrication Combustion air filter and preheating
without preheating CG 170 -20
Suction and Cooling system (biogas applications and tropical conditions) Paint job
Primer, top coat and spare paint: Cat-yellow EATY008 Name plate
name plate in English Crankcase ventilation
Crankcase ventilation / UPF 105 Exhaust pressure monitor
Exhaust back pressure sensor
Spare parts for commisioning
Spare parts for comissioning CAT TEM system Base system TEM
Specification -
Remark
Quantity Description
Base system (CST170F20-F) Frequently chosen options TEM
Heat utilization with heating circuit (HK)
Dump cooling and exhaust bypass control (NK/BY)
Radiator controler (TKS1)
3 CH4 compensation for mutable CH4 concentration, extention package for CH4 ompensation
Modbus RTU (MRTU) 3 Demand of external starting preparations (AES) Visualisation TEM
Operating terminal (BRT-C)
TEM control cabinet, packaging, cables
Console (KBW)
TEM connecting cable set CG 170K/170 15m (K20ARM15) Plant components Batteries
Starter battery in quadruple storage box Zero-pressure gas control train
Gas train DN 150/150/150 (RMG) 3 Non-standard zero-pressure gas train -3 Non-standard zero-pressure gas train Intercooling circuit sensors
Counter flange DN 65 3 Safety valve 3 bar 3 Differential pressure switch 3 Temperature sensor PT 100 3 Water low level switch 3 Ventilation valve 3 Three-way valve DN 65/ PN16, 230 V Engine cooling circuit sensors
Safety valve 3 bar
Differential pressure switch 3 Water low level switch 3 Ventilation valve 3 Electric preheating 9 kW Heating circuit sensors
Remark
Quantity Description
Differential pressure switch 9 Temperature sensor PT 100 Back-up cooling circuit sensors
Counter flange DN 100
Temperature sensor PT 100 3 Water low level switch 3 Ventilation valve 3 Three-way valve DN 100/ PN16, 230 V Cooling water pumps intercooling circuit
Counter flange DN 50 Coolant pump DN 50 Etaline vis kontakter/133 Cooling water pumps engine cooling circuit
Counter flange DN 65 Counter flange set DN 65 Throttle valve DN 65
Coolant pump DN 65 Etaline 065-065-160/162 Expansion vessels intercooling circuit
Expansion vessel 250l
Lock-off valve for expansion tank
Expansion tank manometer Manometer cut-off valve Expansion vessels engine cooling circuit
Expansion vessel 400l Lock-off valve for expansion tank 3 Expansion tank manometer Manometer cut-off valve Services Final inspection
engine test without customer participation Packing
Seaworthy packing for genset: wooden pallet and foil cover 1 packing plant components Standard documentation
Standard documentation (2 copies) incl. preparation