Ny Małek Agregaty M-4 MAX 400V plastringsmaskin
≈ 51 800 kr
Węgrzce
Dersom du bestemmer deg for å kjøpe utstyr til en lav pris, sørg for at du kommuniserer med den ekte selgeren. Finn ut så mye informasjon som mulig om eieren av utstyret. En måte å jukse på er å presentere deg selv som en ekte bedrift Ved mistanke, informer oss om dette for ekstra kontroll, via tilbakemeldingsskjemaet.
Før du bestemmer deg for å gjøre et kjøp, se nøye på flere salgstilbud for å forstå den gjennomsnittlige prisen på det valgte utstyret. Dersom prisen på tilbudet du liker er mye lavere enn lignende tilbud, tenk over saken. En betydelig prisforskjell kan indikere skjulte defekter eller et forsøk fra selgeren til å utføre ulovlige handlinger.
Ikke kjøp produkter der prisen er for ulik fra gjennomsnittsprisen for lignende utstyr.
Ikke gi samtykke til tvilsomme pantsettelser og forhåndsbetalte varer. Ved tvil, ikke vær redd for å oppklare detaljer, spørre om flere bilder og dokumenter for utstyret, og sjekk autentisiteten til dokumentene, still spørsmål.
Den mest vanlige typen svindel. Urimelige selgere kan be om et visst beløp i forhåndsbetaling for å «reservere» din rett til å kjøpe utstyret. På denne måten kan svindlere samle inn et stort beløp og forsvinne, og aldri ta kontakt igjen.
- Overføring av forskuddsbetaling til kortet
- Ikke utfør en forhåndsbetaling uten å ha dokumenter som bekrefter overføringen av pengene, dersom selgeren under prosessen virker tvilsom.
- Overføring til en forvaltningskonto
- En slik forespørsel er alarmerende, og mest sannsynlig kommuniserer du med en svindler.
- Overføring til en firmakonto med et lignede navn
- Vær varsom, svindlere kan utgi dem selv for å være anerkjente selskaper, ved å gjøre små endringer på navnet. Ikke overfør penger dersom selskapets navn er tvilsomt.
- Utskiftning av egne detaljer på fakturaen til et ekte selskap
- Bør du utfører overføringen, sjekk at de spesifiserte detaljene er riktige, og hvorvidt de faktisk hører til det spesifiserte selskapet.
Selgers kontakter
+48 883 08...
Vis
+48 883 088 443
+48 603 08...
Vis
+48 603 088 447
+48 502 40...
Vis
+48 502 402 937
Polen 
Polen, Węgrzce
Polen, Węgrzce
Polen, Węgrzce
Polen, Węgrzce
Polen, Węgrzce
Polen, Węgrzce
Polen, Węgrzce
Polen, Węgrzce
Polen, Węgrzce
Polen, Węgrzce
Polen, Węgrzce
Polen, Węgrzce
Polen, Węgrzce
Polen, Węgrzce
Polen, Bytonia
Polen, Wrocław
Polen, Bytonia
Polen, Bytonia
vis kontakter
The M-4 MAX 400V plastering aggregate is a top-class device that meets rigorous standards and has a European Certificate. The machine will meet the expectations of even the most demanding customers operating in the construction industry. Reliability and refinement in every detail are the characteristics of the plastering unit.
If you are looking for a machine that will serve you for years, choose our offer! We are a Polish manufacturer, making machines we rely on the experience gained, both professional and technical. Our equipment is a response to the needs of the constantly developing construction industry. Without appropriate equipment, it is impossible to provide services at a high level, let alone compete with the competition. M-4 MAX 400V plastering aggregates are devices that you must have in your company. You can read about the specifics of the product, purpose and benefits below.
The M-4 MAX 400V plastering unit is used for mechanical application of plaster and mortars with a maximum grain size of 3 mm:
gypsum plaster
gypsum and lime plaster
cement
lime plaster
lime-cement plaster
mortar
damping plaster
joint mortar
reinforcement and adhesive mortar
machine spouts
adhesives, lime coats
anhydrite screeds
other
The aggregate tank can be filled with either bagged material or through the flow or blow cap.
Plastering aggregate M-4 MAX 400V technical specification:
gear motor of the feeder NORD 0.83kW S3-70% 29 rpm M-4 MAX 400V
gear motor NORD 6.05 kW 415 rpm feed pump M-4 MAX 400V
water pump PK65 380 - 400V 1.7A 0.5kW
pump unit D6–3 stator + rotor,
0.9kW air compressor 250 l / min, pressure 5.5 bar,
cleaning unit - shaft and cleaner,
socket wrench for screwing in the rotor,
cleaning ball of the working hose fi30,
water meter 150 - 1500 l / h,
working hose DN25 10 m with camlock couplings,
3/4 "water hose, 25 m, pressure gek fitting and gek fitting with a stub pipe,
3/8 ”reinforced air hose 12.5 m fittings 2 x geka with a connector
5x 2.5 mm2 20 m power cord with a 5B PCE 32A plug,
75 cm spray lance with a Ø 12 nozzle
gun scraper,
a key to unscrew the water reducer glass,
mixer M-4 Max
yoke pump DN25 male cam lock type D
spray gun for producing water mist
Additional equipment of the aggregate
working pressure timer with a plaster separator 60 bar DN25
cover for a plastering unit
measurement probe 42V
various types of nozzles for the gun: pink, black, black conical and various sizes fi: 8,10,12,14,16,18
a tube for a lance of various lengths: 25 cm, 75 cm, 100 cm, 125 cm, 150 cm
yoke of the pump for DN35 type D faucets
yoke pump for faucets DN35 type R
pump yoke DN25 male cam lock type R
35 mm hose for spouts
clock of working pressure with a separator for spouts 60 bar DN35
rotomix type D DN35 / 25
rotomix type R DN35 / 25
tarpaulin - cover for a plastering unit
control button with a cable of various lengths: 12 m, 20 m, 30 m
extension for the M-4 aggregate, the original Malek 96 liters
Main components of the generator
The subassemblies that can be removed from the unit if necessary (including transport) are:
compressor
water pump
mixing chamber with a mixing pump
near the feeder
feeder wheel cover
charging grate
The weight of the aggregate with all major components is 270 kg.
What distinguishes the M-4 MAX plastering unit from other aggregates? Discover the greatest advantages of the device:
The M-4 MAX 400V plastering unit is equipped with a water pump switch. It is possible to switch to the AUTO operating mode, both with low pressure and no water pressure.
built-in phase loss sensor, as well as the direction of rotation of the motor.
M-4 MAX 400V plastering aggregates have the function of reversing the mixture - at reverse speed, which is especially important in the event of a blockage of the mixture.
one of the accessories is the PEDROLLO 400 V 500W water pump (it can be disassembled).
the assembly of the electric box was made on Eaton components, and the mounted power sockets are made by PCE.
The M-4 MAX 400V plastering unit is equipped with two 230 V sockets, one of which is controlled to connect an optional pump, and the other can be used to connect, for example, a LED lamp
height of hopper 950mm
tank capacity about 150L
pumping pressure max 40bar
feeding distance max 40m
possibility of connecting a silomat
possibility of connecting the remote control controlling the aggregate
possibility of connecting the gun to plaster, facade and garage systems
We provide a 12-month warranty for the M-4 MAX plastering aggregate!
Why is it worth choosing M-4 MAX 400V plastering aggregates? These are new generation products that meet the highest standards. They provide comfortable and efficient work. By choosing aggregates, you gain the best ally, helping in the implementation of these larger and smaller works. The M-4 MAX 400V plastering unit ensures that nothing unforeseen will surprise you during your work. Taking care for the highest quality, we decided to certify the structure, providing solutions tailored to the needs.
Our offer also includes construction parts for aggregates and spare parts.