Nachi PVD-1B-32P 705-41-08001 hydraulisk pumpe for Komatsu PC30-6 minigraver
Dersom du bestemmer deg for å kjøpe utstyr til en lav pris, sørg for at du kommuniserer med den ekte selgeren. Finn ut så mye informasjon som mulig om eieren av utstyret. En måte å jukse på er å presentere deg selv som en ekte bedrift Ved mistanke, informer oss om dette for ekstra kontroll, via tilbakemeldingsskjemaet.
Før du bestemmer deg for å gjøre et kjøp, se nøye på flere salgstilbud for å forstå den gjennomsnittlige prisen på det valgte utstyret. Dersom prisen på tilbudet du liker er mye lavere enn lignende tilbud, tenk over saken. En betydelig prisforskjell kan indikere skjulte defekter eller et forsøk fra selgeren til å utføre ulovlige handlinger.
Ikke kjøp produkter der prisen er for ulik fra gjennomsnittsprisen for lignende utstyr.
Ikke gi samtykke til tvilsomme pantsettelser og forhåndsbetalte varer. Ved tvil, ikke vær redd for å oppklare detaljer, spørre om flere bilder og dokumenter for utstyret, og sjekk autentisiteten til dokumentene, still spørsmål.
Den mest vanlige typen svindel. Urimelige selgere kan be om et visst beløp i forhåndsbetaling for å «reservere» din rett til å kjøpe utstyret. På denne måten kan svindlere samle inn et stort beløp og forsvinne, og aldri ta kontakt igjen.
- Overføring av forskuddsbetaling til kortet
- Ikke utfør en forhåndsbetaling uten å ha dokumenter som bekrefter overføringen av pengene, dersom selgeren under prosessen virker tvilsom.
- Overføring til en forvaltningskonto
- En slik forespørsel er alarmerende, og mest sannsynlig kommuniserer du med en svindler.
- Overføring til en firmakonto med et lignede navn
- Vær varsom, svindlere kan utgi dem selv for å være anerkjente selskaper, ved å gjøre små endringer på navnet. Ikke overfør penger dersom selskapets navn er tvilsomt.
- Utskiftning av egne detaljer på fakturaen til et ekte selskap
- Bør du utfører overføringen, sjekk at de spesifiserte detaljene er riktige, og hvorvidt de faktisk hører til det spesifiserte selskapet.
Selgers kontakter
+86 189 289...
+86 189 2896 5241
Kina
Kina
Kina
Kina
Kina
Kina
Kina
Kina
Kina
Kina
Kina
Kina
Kina
Kina
Kina
Kina
Kina
Romania
Italia, Rome
Product Brief
This OEM specification variable axial piston hydraulic main pump, part number 705-41-08001 with pump model PVD-1B-32P, serves as the central hydraulic power assembly designed for Komatsu PC30-6 mini crawler excavator. It converts engine rotational torque into adjustable high-pressure hydraulic oil flow, to power bucket digging, boom lifting, arm retraction, machine slew and track travel synchronously. Widely used in backyard renovation, narrow trench digging, greenhouse earth moving and small demolition jobs, this OEM replacement pump is popular among overseas repair workshops, mini excavator rental operators and cross-border spare part merchants for hydraulic system overhaul and direct replacement of worn pumps on Komatsu PC30-6 machine fleets.
During continuous site operation under frequent start-stop cycles, hydraulic oil impurity contamination and repeated light-to-medium load shifts, the original pump will gradually suffer cylinder block scuffing, piston shoe wear, swash plate abrasion and increased internal leakage. Common failure signs include weak digging force, slow combined movements, power drop under heavy digging load, steady rise of hydraulic oil temperature, abnormal buzzing or tapping noise from pump housing and sluggish machine movement response. Once severe internal wear occurs, the whole hydraulic system loses power output, resulting in machine shutdown, expensive on-site repair charges and delayed construction schedules for equipment owners.
Our OEM replacement pump strictly complies with original drawing standards for mounting flange dimension, drive shaft spline, oil port layout and regulator pressure setting. No extra drilling, cutting or gasket modification is required during field installation. Maintenance technicians can finish pump replacement directly and minimize machine downtime. Compared with high-priced genuine pumps with long procurement lead times, this hydraulic pump maintains stable working performance and supports bulk repeat purchasing for global suppliers specializing in Komatsu mini excavator hydraulic spare parts.
Product Highlights
1. 1:1 OEM dimension interchangeability for fast mini excavator hydraulic repair
All flange sizes, oil port positions and drive shaft spline parameters fully match OEM specifications. Service technicians can complete pump swap without secondary machining, improving overhaul efficiency for service centers and used mini excavator refurbishment work.
2. Reinforced friction pair design to adapt frequent intermittent working loads
Many low-cost substitute pumps rapidly lose volumetric efficiency when working with contaminated hydraulic fluid carrying fine metal debris. Our core internal friction components adopt upgraded heat treatment plus ultra-precise surface grinding craft, improving anti-cavitation and anti-wear properties, extending service life for PC30-6 mini excavators working in tight and small construction sites.
3. Full bench performance inspection before shipment
Each finished hydraulic pump undergoes pressure holding test, flow calibration and noise detection on dedicated hydraulic test bench before packing. Defective units are screened out inside factory, lowering rework risks for service crews and avoiding sudden hydraulic breakdown on construction sites.
4. Cost-effective OEM alternative for mini excavator fleet maintenance
Genuine OEM hydraulic pumps for Komatsu PC30-6 carry high purchase price and unstable stock availability. Our factory direct replacement pump balances reliable hydraulic performance and competitive pricing, helping machine owners and service shops reduce overall fleet maintenance expenditure.
5. Flexible logistics solutions for bulk purchasers
In-stock products support fast shipment once payment confirmed. Air freight service can be arranged for urgent emergency breakdown orders. Sea consolidation and full-container transport help overseas bulk buyers cut comprehensive logistics costs.
Factory Production Strength
Our manufacturing factory focuses on R&D and mass production of OEM-grade hydraulic spare parts for Japanese mini excavators, covering axial piston main pumps, pilot pumps and matched hydraulic accessories. We own complete production workflow: alloy steel precision machining, surface heat treatment, component assembly and finished-product hydraulic bench validation. Simulated frequent start-stop cyclic durability tests are conducted to verify component durability under real-world residential and small earthmoving operating environments. Our spare parts are exported to multiple overseas regions and maintain long-term stable cooperation with global construction machinery spare part wholesalers.
Frequently Asked Customer Questions
Q1: Can this 705-41-08001 PVD-1B-32P hydraulic pump fit other Komatsu excavator models?
A1: Cross-model installation is not recommended. Different main pumps differ in shaft spline, displacement and oil port layout. Please double-check machine model and original part number before placing orders.
Q2: What hydraulic faults can this main pump resolve?
A2: It fixes malfunctions caused by internal component abrasion: insufficient digging power, slow compound movements, high hydraulic oil temperature, internal leakage, abnormal pump noise and weak heavy-load capacity.
Q3: Is tiered volume discount available for large quantity orders?
A3: Yes, preferential pricing is determined by purchasing quantity. Full-container sea freight arrangement can be supported to reduce total logistics expense.
Q4: What export-grade packaging is used for long-distance overseas transit?
A4: Anti-rust oil is applied on all precision mating surfaces. The pump is wrapped with waterproof anti-rust film and shock-absorbing foam, then fixed inside reinforced plywood case, protecting precision internal components from collision and rust during long ocean shipping.