Komatsu PC 210 LC beltegraver

Komatsu PC210-8M0 excavator parameter configuration
specification
Power: Traditional power
Joint ventures/imports
Bucket backhoe
The working weight of the whole machine (kg) is 20100-20550
Bucket capacity (m³) 0.94
Boom length (mm) 5700
Stick length (mm) 2925
Origin: Changzhou, Jiangsu Province
Tonnage (tons) 21
performance
Rotation speed (rpm) 12.4
Travel speed (km/h) 5.5/4.1/3.0
Climbing ability (%) 70% (35°)
Grounding specific pressure (Kpa) 35.7/46.5
Bucket digging force (kN) 149
Stick digging force (kN) 108
Maximum traction (kN) 178
dynamical system
Engine model Komatsu SAA6D107E-1
Rated power (kw/rpm) 103/2000
Displacement (L) 6.69
Number of cylinders (pcs) 6
Bore × stroke (mm) 107×124
Cooling method: Water cooling
Working form: water-cooled, 4-stroke, direct injection; Turbocharged, after-cooled
Hydraulic system
Main pump type variable piston pump
Traveling Hydraulic Motor Type Axial Piston Motor ×2 (with Parking Brake)
Slewing Hydraulic Motor Type Axial Piston Motor ×1 (with Slewing Holding Brake)
The maximum flow rate of the main pump (l/min) is 439
Pilot oil circuit (MPa) 3.2
Working hydraulic oil circuit (Mpa) 37.3
Travel Hydraulic Circuit (Mpa) 37.3
Slewing hydraulic circuit (Mpa) 28.9
Boom cylinder - number × bore × stroke (mm) 2-120× 1334×85
Stick cylinder - number × bore × stroke (mm) 1-135× 1490×95
Bucket cylinder - number × bore × stroke (mm) 1-115× 1120×80
Oil capacity
Fuel tank (L) 400
Hydraulic Tank (L) 135
Engine oil change volume (L) 23.1
Coolant (L) 20.4
Body size
Total length of transport (mm) 9425
Total width of transport (mm) 2800
Total Transport Height (mm) 2970 (to boom top)
Cab total height (mm) 3040
Boarding width (mm) 2710
Track grounding length (mm) 3275
Total track length (mm) 4070
Track shoe width (mm) 600
Total Track Width (mm) 2800
Track gauge (mm) 2200
Minimum ground clearance (mm) 440
Counterweight ground clearance (mm) 1085
The minimum turning radius of the front working device (mm) is 3040
Rear end slewing radius (mm) 2750
Scope of work
Maximum digging radius (mm) 9875
The maximum excavation radius of the shutdown surface (mm) is 9700
Maximum digging depth (mm) 6620
Maximum digging height (mm) 10000
Maximum unloading height (mm) 7110
Maximum vertical digging depth (mm) 5980
Maximum effective digging depth (mm) 6370
Boom offset (left/right °) None
Boom slewing angle (left/right °) None
Width × height of bulldozer plate (mm) None
Dozer shovel lifting or pushing depth (mm) None