Ny MARINI Magnum 80 fully mobile asphalt plant asfaltverk

PDF
Interessert i annonsen?
Kontakt selgeren
1/4
PDF
Pris:
på forespørsel
Send en prisforespørsel
Kontakt selgeren
Merke MARINI
Modell Magnum 80 fully mobile asphalt plant
Type asfaltverk
Produksjonsår 2021
Kjøretimer 1 m/t
Sted Tyskland Finowfurt near Berlin
Dato oppført Sep 30, 2021
Machineryline ID WP2122
Beskrivelse
Yteevne 80 t/t
Stand
Stand ny
Mer informasjon
Engelsk
Marini Magnum 80 mobile asphalt mixing plant

year: NEW
capacity: up to 80 t./h
1 year guarantee

- calorific power of the fuel 9,600 kcal / kg;
- material passing through the #8 (2,38mm) sieve is no more than 20%;
- The equipment was developed in order to facilitate the transportation as much as possible without the need of pilot cars. Simply hook up the equipment to the asphalt binding agent storage and fuel system.
- Chassis is built with a highly resistant I-Beam with a forged king pin, 3 axles with special tires, suspension springs, air brakes, tank, and safety valve, highway signaling system, mechanical foot with telescopic support.
- Three cold feed bins with 7m3 each developed to hold charges during the cold material loading and provide a
better material flow .
- 50.8CM feeder belt with idle rollers diameter 10.6cm with permanent lubrication. The gear box is hooked
directly to the drum shaft. Drums are regulated with oscillating and shielded bearings. 3hp electric motors.
- 60.96cm conveyor belt with idle rollers diameter 10.6cm , V shielded rollers actuated by a 5hp electric motor.
- Automatic vibrator system for one bin, which facilitates the flowing of fine aggregates with high humidity ratios in one of the bins.

DRYER
- Feeding belts with 20" wide canvas supported by 4" rollers in "V" with permanent lubrication. The gear box is hooked directly to the drum shaft. Drums are regulated with oscillating and shielded bearings. 3-hp electric motor.
- Conveyor belt in U-Beam, 24 wide canvas supported by 4 rollers in V shielded rollers actuated by a 7.5hp electric motor.
- Sieve with a screen for eliminating oversized materials.
- Drum dryer and mixer with heat insulation, four driven supports rollers made of high carbon steel driven by gear box, electric motor 15hp.
- rotational external mixer
- burner with fuel spraying by gear pump 10.000.000 Kcal/h
- Dry filtering system that consists of dust collecting system
- Control system Sistex

complete offer and details by request * more machines, mixing plants and trucks on our website vis kontakter
Vis hele kommentaren
Marini Magnum 80 mobile asphalt mixing plant

year: NEW
capacity: up to 80 t./h
1 year guarantee

- 3% weighted average of humidity in the aggregates;
- installation at sea level;
- calorific power of the fuel 9,600 kcal / kg;
- material passing through the #8 (2,38mm) sieve is no more than 20%;
- ambient temperature of 15°C to 20°C;

- The equipment was developed in order to facilitate the transportation as much as possible without the need of pilot cars. Simply hook up the equipment to the asphalt binding agent storage and fuel system.
- Chassis is built with a highly resistant I-Beam with a forged king pin, 3 axles with special tires, suspension springs, air brakes, tank, and safety valve, highway signaling system, mechanical foot with telescopic support.
- Three cold feed bins with 7m3 each developed to hold charges during the cold material loading and provide a
better material flow .
- 50.8CM feeder belt with idle rollers diameter 10.6cm with permanent lubrication. The gear box is hooked
directly to the drum shaft. Drums are regulated with oscillating and shielded bearings. 3hp electric motors.
- 60.96cm conveyor belt with idle rollers diameter 10.6cm , V shielded rollers actuated by a 5hp electric motor.
- Automatic vibrator system for one bin, which facilitates the flowing of fine aggregates with high humidity ratios in one of the bins.

DRYER
- Feeding belts with 20" wide canvas supported by 4" rollers in "V" with permanent lubrication. The gear box is hooked directly to the drum shaft. Drums are regulated with oscillating and shielded bearings. 3-hp electric motor.
- Conveyor belt in U-Beam, 24” wide canvas supported by 4” rollers in “V” shielded rollers actuated by a 7.5hp electric motor.
- Sieve with a screen for eliminating oversized materials.
- Drum dryer and mixer with heat insulation, four driven supports rollers made of high carbon steel driven by gear box, electric motor 15hp.
- rotational external mixer
- Terex CF04 burner with fuel spraying by gear pump 10.000.000 Kcal/h
- Dry filtering system that consists of dust collecting system
- Control system Sistex

complete offer and details by request * more machines, mixing plants and trucks on our website vis kontakter
Viktig
Dette tilbudet er kun veiledende. Vennligst be om mer presis informasjon fra selgeren.
Tips for kjøp
Sikkerhetsråd
Skal du selge maskineri eller kjøretøy?
Du kan gjøre det med oss!
Lignende annonser